Polyethylene liners of modular acetabular components wear sometimes need to be replaced, despite the metal shell being well fixed. Replacing the liner is a relatively simple procedure, but very little is known of the outcome of revision. We prospectively followed up 1126 Harris-Galante I metal-backed, uncemented components for between nine and 19 years. We found 38 (3.4%) liners of 1126 acetabu...

This article describes a case of late locking mechanism failure and disassociation of a Pinnacle acetabular cup (DePuy, Warsaw, Indiana) and Marathon polyethylene liner (DePuy) 53 months after routine primary total hip arthroplasty in an active patient. Following an uncomplicated initial postoperative recovery, the patient felt a pop while kneeling for gardening activities. The patient had no p...

The equations governing the motion of steel balls and their impact onto shell liners in industrial Semi-Autogenous Grinding (SAG) mills are derived in full details by the authors and are used in order to determine the effective design variables for optimizing the working conditions of the mill and to avoid severe impacts which lead to the breakage of SAG mill shell liners. These design vari...

This paper compares Discrete Element Model predictions for power and variations in impact and abrasion (low angle impact) breakage with power and grinding rate predictions from the more "traditional" JKMRC models. The DEM predictions are based on measured mill load sizings from a large industrial SAG mill at two operating conditions. The load sizings can also be predicted with reasonable accura...

Eight retrieved metal-on-metal total hip replacements displayed corrosion damage along the cobalt-chromium alloy liner taper junction with the Ti alloy acetabular shell. Scanning electron microscopy indicated the primary mechanism of corrosion to be grain boundary and associated crevice corrosion, which was likely accelerated through mechanical micromotion and galvanic corrosion resulting from ...

Abstract A polymer-enhanced bentonite-sand mixture has been widely used as a clay liner. This research focuses on the potential use of chitosan natural polymer mixed with bentonite liner base material. The is type calcium bentonite, which easily obtained in market. Meanwhile, produced from shrimp shell waste and also available process mixing percentage 2–6% was carried out using certain method,...

On-line monitoring and recognition of mill load status has significant effect on the operating efficiency, product quality and energy consumption for the milling circuit. Due to low reliability to recognize the operating states near the boundary region, a multiclassification model is built to identify the operating status of ball mill load. Spectrum features of shell vibration signals are extra...

Third-generation composite ceramics (eg, Delta; DePuy Orthopaedics, Warsaw, Indiana; Ceramtec, Plochingen, Germany) have greatly improved material characteristics compared with second-generation products. This case report presents a patient after total hip arthroplasty with a fractured ceramic liner and a heavily worn ceramic head (both third-generation ceramics) retrieved 9 months after surger...

OBJECTIVE In uncemented revision total hip replacement due to polyethylene wear, the metal cup needs to be maintained when its stability is checked during surgery, only replacing the polyethylene that is cemented if anchoring is not possible. The aim of the present study was to evaluate the medium-term clinical and radiological results of a polyethylene liner cemented into an osseointegrated ac...