Al-doped ZnO (AZO) thin films with various Al concentrations were synthesized on Si(001) substrates with native oxide layers by atomic layer deposition process. The effects of the Al concentration on the microstructural characteristics of the AZO thin films grown at 250 degrees C and the correlation between their microstructural characteristics and electrical properties of the AZO thin films we...

nanoindentation techniques are widely used for the study of nanomechanical properties of thin nanocomposite coatings. theoretical concepts and practical use of nanoindentation method are summarized with reporting the applications of these tests in characterization of some particular thin nanocomposite hybrid coatings prepared by sol-gel process. the better mechanical properties can be obtained ...

The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...

INTRODUCTION It has long been known that variations in the microstructure of bone have a profound effect on the mechanical properties of the tissue and that these properties vary significantly between and within the cortices of bones. However, the microstructural basis and the functional significance of such variation remains poorly understood. One reason for this is the difficulty in acquiring...

White structure flaking (WSF) has been found to be one of the failure modes in bearing steels under rolling contacts through the formation of cracks associated with a microstructural change called white etching area (WEA). In the present research, the effects of the high-pressure torsion (HPT) process on the microstructure and mechanical properties of an AISI 52100 alloy are studied. An anneale...

An ultrafine grained dual phase (UFG DP) steel containing niobium was produced by a new route utilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex starting structures. The effects of intercritical holding time on the microstructural evolutions and mechanical properties were studied. The results showed that increasing intercritical holding time enhnac...

The image contrast in magnetic resonance imaging (MRI) is highly sensitive to several mechanisms that are modulated by the properties of the tissue environment. The degree and type of contrast weighting may be viewed as image filters that accentuate specific tissue properties. Maps of quantitative measures of these mechanisms, akin to microstructural/environmental-specific tissue stains, may be...

We present an analytical water diffusion model for inferring important microstructural properties such as axon radius, orientation, and packing density using low-q angular Double Pulsed Gradient Spin Echo (double-PGSE) NMR, taking into account finite gradient pulses. The MR signal attenuation obtained from Single Pulsed Gradient Spin Echo (single-PGSE) NMR reflects the underlying microstructura...