Efforts to increase the mass transfer coefficient, enhance the contact area, and decrease the power input of contractors have given risen to the development of the pre-dispersed solvent extraction (PDSE) contactor and the devise of the new dissolved nitrogen PDSE (DNPDSE) contactors. The studies conducted after the design of the new contactor to determine the working conditions for its suitable...

Humidification process is one of the applications of membrane contactor in which partial pressure of a vapor in the gas stream increases. In this study, two different polyethersulfone and polyetherimide hollow fiber membranes were fabricated and characterized by various test methods and their performance in humidification process under different operating conditions was investigated. The PES me...

Introduction: Removal of ammonia from water of a waste water treatment plant by a membrane contactor were simulated on transient state and compared with experimental data. This technology will be applied in the hydrogen and oxygen production by electrolysis via renewable energies as can be seen in Figure 1. The aim of this study relies on fulfill the process requirements in the electrolysis, si...

Countercurrent membrane supported reactive extraction (MSRE) was studied for removal of carboxylic acids from aqueous streams with a PTFE capillary membrane. Analysis the mass transfer rates performed to support modeling process. Total coefficients ranging 2.0·10-7 4.0·10-7 m/s were obtained when extracting lactic acid 20 wt% tri-N-octyl amine in 1-decanol thicknesses 260 µm and 80 µm. The limi...

No. # 121 Determination of Hollow Cathode Plasma Contactor System Requirements using an Electrodynamic Tether System Simulation Tool One application of bare electrodynamic tether systems is to deorbit spent satellites and debris from Low-Earth Orbit. In these systems a hollow cathode plasma contactor sub-system is used to form a plasma bridge between one end of the tether and the space plasma i...

Polypropylene hollow fiber membrane (PPHFM) contactor, with aqueous solution absorbent such as sodium hydroxide (NaOH), monoethanolamine (MEA) and diethanolamine (DEA), was designed and used to separate and fix CO2 from CO2/N2 gas mixtures. The factors that influence the separation properties of CO2/N2 were investigated. It was found that the CO2 removal efficiency is the best by using MEA solu...