This paper presents a low voltage wideband downconversion mixer using current-mode approach for multi-standard receivers. The proposed mixer uses a current mirror amplifier with an embedded passive switching core to achieve mixing function, which can combine the advantages of active and passive mixers simultaneously. The mixer is implemented using a 0.18μm CMOS technology and covers frequency b...

This paper presents the design methodologies and implementation of HEMT RF down conversion Mixer for 1.8 GHz to 5 GHz wireless and mobile applications.In many recent receiver designs, the front-end mixer determines the receiver's sensitivity and better isolation for the system. Single transistor mixer are developed for such an applications i.e. a Common source configuration, where the LO signal...

In this work we present a Schottky diode grid mixer suitable for mixing or detecting quasi-optical signals. The mixer is a planar bow-tie grid structure periodically loaded with diodes. A simple transmission line model is used to predict the reflection coefficient of the grid to a normally incident plane wave. The grid mixer power handling and dynamic range scales as the number of devices in th...

in this study, the effect of chemical modification of wood flour on the mechanical properties of polypropylene based composites was investigated using by dynamic mechanic thermal analysis. to meet this objective, the wood flour treated with chemical components including alkaline, acetic acid and benzoyl chloride, and then the chemically treated fibers were compounded with polypropylene at 180 °...

A nanocomposite containing polypropylene (PP) and nano α-Al2O3 particles was prepared using a Haake internal mixer. Mechanical tests, such as tensile and flexural tests, showed that mechanical properties of the composite were enhanced by addition of nano α-Al2O3 particles and dispersant agent to the polymer. Tensile strength was approximately ∼ 16% higher than pure PP by increasing the nano α-A...

This paper presents a design of an UWB downconversion integrated CMOS resistive ring mixer with Linear Voltage Regulator (LVR), to supply required biasing voltages for the mixer section. The designed mixer circuit has been optimized for using in heart rate extraction system with microwave Doppler radar at 2.4GHz frequency. This mixer needs 2 DC bias voltages equal to 0.5 and 1 volts for its bes...

This paper describes a CMOS mixer core, operating at 1GHz, where the RF signal is input via the bulk. The advantages of a bulk driven mixer are low power supply voltages and low power consumption. Simulations have confirmed that a power supply as low as 1V can be used to power the mixer core, which drains approximately 1.6mA. Although the mixer core consumes very low power, it still provides re...

The original Mixer corpus was designed to satisfy developing commercial and forensic needs. The resulting Mixer corpora, Phases 1 through 5, have evolved to support and increasing variety of research tasks, including multilingual and cross-channel recognition. The Mixer Phases 4 and 5 corpora feature a wider variety of channels and greater variation in the situations under which the speech is r...

Intermodulation distortion (IMD) suppression is a critical issue in modern military and commercial RF/microwave systems. Pressed by the demands imposed by distortion-sensitive digital modulation formats, modern systems routinely specify linearity requirements that are impossible to attain using conventional approaches. To meet these new challenges, Marki Microwave has introduced the Two-Tone-Te...

This mixer is based on a passive FET resistive frequency converter cell described by first described in the literature by Steven Maas [ ] and explored by Wes Hayward and others [ ]. One difficulty with a DFET passive mixer is obtaining negative gate bias. This has been achieved using gate conduction as in the TriQuint 5M31 [Campbell, Criss], a LO frequency driven negative voltage converter as i...