The rheological and filtration properties of drilling mud under down-hole conditions may be very different from those measured at ambient pressures and temperatures at the surface. This paper presents the results of an experimental investigation into the temperature and salinity and pH effects on drilling mud rheological and filtration properties. Results are given from tests on water base mud ...

Chemical flooding, especially alkaline/surfactant/polymer flooding, is of increasing interest due to the world increasing oil demand. This work shows the aspects of using alkaline/surfactant/polymer as an enhanced oil recovery method in the porous media having a high dead-end pore frequency with various dead-end pore parameters (such as opening, depth, aspect ratio, and orientation). Using glas...

For the large pores and cracks of reservoirs with low temperatures, high salinity, and low permeability, a new type of high strength gel ABP system is developed in this paper. The defects of conventional gels such as weak gel strength, no gelling, and easy dehydration are overcome under the conditions of low temperature and high salinity. The temperature and salt resistance, plugging characteri...

The compatibility between polymer and surfactant solutions is the main parameter for the optimisation of this combination method. In order to obtain the sufficient viscosity and the low interfacial tension of these solutions, it is necessary to know the conditions under which the different additives are compatible. We have studied the monophase to diphase transition of the system, the critical ...

At elevated temperatures in aqueous solution, partially hydrolyzed polyacrylamides (HPAM) experience hydrolysis of amide side groups. However, in the absence of dissolved oxygen and divalent cations, the polymer backbone can remain stable so that HPAM solutions were projected to maintain at least half their original viscosity for over 8 years at 100°C and about 2 years at 120°C. Within our expe...

High Temperature Aquifer Thermal Energy Storage (HT-ATES) systems can be implemented to store geothermal energy, residual industrial heat and solar heat. Due to the large temperature differences between the injection fluid and ambient groundwater, buoyancy flow occurs, which causes heat losses which in turn results in poor efficiency of such systems. The heat losses can be reduced by applying d...

Abstract Chemical enhanced oil recovery (EOR) processes are usually used as additives for hydrocarbon production due to its simplicity and relatively reasonable additional costs. Polymer flooding uses polymer solutions increase by decreasing the water/oil mobility ratio increasing viscosity of displacing water. The commonly synthetic water-soluble in EOR application is partially hydrolyzed poly...