The performance of ion exchange (IX) resin for organics removal from wastewater was assessed using advanced characterisation techniques for varying doses of IX. Organic characterisation using liquid chromatography with a photodiode array (PDA) and fluorescence spectroscopy (Method A), and UV254, organic carbon and organic nitrogen detectors (Method B), was undertaken on wastewater before and af...

As a reaction to the increasing noise pollution, caused by the expansion of airports close to residential areas, porous trailing edges are investigated to reduce the aeroacoustic noise produced by flow around the airframe. Besides mechanical and acoustical investigations of porous materials, the fouling behavior of promising materials is an important aspect to estimate the performance in long-t...

Advanced wastewater treatment using membranes are popular environmental system processes since they allow reuse and recycling. However, fouling is a key limiting factor and so proprietary systems such as Avanti's RPU-185 Flexidisks membrane bioreactor (MBR) use novel rotating membranes to assist in ameliorating it. In earlier research, this rotating process was studied by creating a simulation ...

One of the most costly problems in the maintenance of heat exchangers is de-fouling, which results in a waste of time and money. The present study includes two parts: the first section addresses fouling factor, its disadvantages, and circumstance of formation, fouling types, and general models of the fouling. In the second part, the problem of fouling in oil exchanger and particular type of fou...

Blooms of blue-green algae such as Microcystis aeruginosa in aquatic systems can result in substantial algal organic matter (AOM) entering downstream water treatment facilities. It has been demonstrated in a number of recent studies that AOM can cause severe fouling of low pressure membrane filtration systems [1, 2]. In this work the distribution of the foulant on a ceramic microfiltration memb...

Application of nanoparticles as additives in membrane synthesis for improving the resistance of membranes against fouling has triggered recent interest in new membrane types. However, most nanoparticle-enhanced membranes suffer from the tradeoff between permeability and selectivity. In this study, nano-WS2 was explored as the additive in membrane synthesis by non-solvent induced phase separatio...

The development of effective mitigation techniques against Botryllus schlosseri and Botrylloides violaceus colonizing blue mussel aquaculture operations has not been well studied. The objectives of our research were to determine the efficacy of using pressurized seawater in the mitigation of colonial tunicate fouling and to identify optimal treatment timing and frequencies in reducing tunicate ...

Better understanding (and so better control) of the stickiness phenomenon of drying sludge is critical for proper operation of a variety of industrial dryers, as is the case for the combined centrifuge-dryer system used on the Monsanto Europe site in Antwerp, Belgium. In this paper a binary logistic regression analysis is performed on a 4-years data base, which resulted in an empirical model fo...

In the last decades much effort was put in understanding fouling phenomena on membranes. One successful approach to describe fouling issues on membranes is the critical flux theory. The possibility to measure a maximum value of the permeate flux for a given system without incurring in fouling issues was a breakthrough in membrane process design. However, in many cases critical fluxes were found...