This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

This paper presents buckling studies made on skew plates using finite element. The effects of the skew angle, aspect ratio, length-to-thickness-ratio, fibre orientation angle, and numbers of layers in the laminate and laminate sequence on the critical buckling load factor (Kcr) of antisymmetric composite laminates have also been presented. The critical buckling load factor (Kcr) is found to inc...

The potential of buckling in compressive members has been considered as a disadvantage when using steel members in the construction industry. In spite of the progress made in this regard, buckling is still considered as a challenge in the analysis and design of compressive steel structural members. Such a challenging phenomenon can be controlled by strengthening of compressive members. Stiffene...

An algorithm based on Semi-Definite Programming (SDP) formulation is proposed for optimum design for specified linear buckling load factor. Optimal trusses and frames are computed by using the primal-dual interior-point method for SDP. It is well known that optimizing structures under buckling constraints is difficult because of nondifferentiability of the buckling load factors for the case of ...

The presence of the delamination causes reductions in the bending stiffness which in turn leads to the undesirable loss in the compressive buckling and post-buckling strength. Thus, it is of chief importance to investigate the compressive behavior of composites with delaminations. Anastasiadis et al. analyzed the buckling and postbuckling behavior of delaminated composite laminates with a throu...

Several deficient steel structural members require to be strengthened all over the world. In this article, horizontal defects were generated at three locations (top, middle, and bottom) on the middle element and the middle of the side element. Consequently, the effects of the location of such defects on axial behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened steel Square Hollow Se...

Porous materials are lightweight, flexible and resistant to hairline cracks, so today with the development of technology porous structure produced for use in various industries. This structure widely use in beams, plates and shells. The purpose of this paper is to investigate the effect of porosity in axial symmetry in bending and buckling load sheet for analysis. For this purpose, a circular p...

The stability analysis of sleeve stiffened pin-ended slender hollow columns of pipe or box section is performed in the present study. This is accomplished by using energy method, employing three terms in the assumed approximate deflection function. The lengthy and tedious algebraic manipulations involved in solving the relevant eigenvalue problem, necessitates employing the "MATHEMATICA" softwa...

Buckling analysis of thin cylindrical shells is very important due to their production process.  Usually longitudinal and transversal stiffeners are used to increase the buckling stiffness. In this paper, considering a thin cylindrical shell with longitudinal and transversal ribs subjected to axial force and lateral pressure, the influence of different aspect of axial force to lateral pressure ...

Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...