Background: Effective polymerization of the composite resin is essential to obtain long term clinical success and has a great importance obtaining improved mechanical properties. The purpose of this study was to measure the effect of the light intensity of LED and QTH curing devices in relation to the light distances, on the hardness (KHN) of two light cure nano-resin composite. Material and Me...

Delivering an inadequate amount of light to a light-cured resin will result in a resin that is inadequately cured. This study measured the radiant exposure that students delivered to a simulated restoration to determine if instruction with immediate feedback increased the amount of light they delivered. The amount of light (radiant exposure in J/cm(2)) delivered to a simulated restoration by si...

objectives: the aim of this study was to evaluate the effect of conventional and high-power light emitting diode (led) light curing units on shear bond strength (sbs) of metal and ceramic brackets to tooth surface. materials and methods: forty sound bovine maxillary central incisors were used for the study. the teeth were divided into four groups (n=10). teeth surfaces were etched with 37% phos...

AIMS The aim of this in vitro study was to evaluate the influence of light curing modes and curing time on the microhardness of a hybrid composite resin. METHODS AND MATERIALS Forty-five Z250 composite resin specimens (3M-ESPE Dental Products, St. Paul, MN, USA) were randomly divided into nine groups (n=5): three polymerization modes (conventional-550 mW/cm2; light-emitting diodes (LED)-360 m...

Background. Bulk-fill composite resins are a new type of resin-based composite resins, claimed to have the capacity to be placed in thick layers, up to 4 mm. This study was carried out to evaluate factors affecting gap formation in Cl II cavities restored using the bulk-fill technique. Methods. A total of 60 third molars were used in this study. Two Cl II cavities were prepared in each tooth, o...

background: application of bonding agents (ba) into deep cavities and light curing them might increase pulpal temperature and threaten its health. the purpose of this study was to evaluate temperature rise of pulp by light curing six ba using two different light curing units (lcu), through a dent in wall of 0.5 mm. materials and methods: this in vitro experiment was carried out on 96 slices of ...

Purpose: This study evaluated the effect of a high-power solid-state light emitting diode (LED) curing unit on the dentin bond strength of a composite resin with self-etching primer adhesives by means of microtensile bond test. Materials and Methods: The flat dentin surfaces of the extracted human molars were prepared. Each surface was treated with either two self-etching adhesive systems (Clea...

The purpose of this study was to assess the effect of light-tip distance on the shear bond strength and failure site of brackets cured with three different light curing units: a high-intensity halogen (Astralis 10, 10-second curing), a light-emitting diode (LED, e-Light, six-second curing), and a plasma arc (PAC System, four-second curing). One hundred and thirty-five bovine permanent mandibula...

introduction : this in vitro study was designed to measure and compare the amount of temperature rise in the pulp chamber of the teeth exposed to different light curing units (lcu), which are being used for curing composite restorations. methods: the study was performed in two settings; first, an in vitro and second was mimicking an in vivo situation. in the first setup of the study, three grou...

From equal beginnings, the economies of Alberta and Saskatchewan have evolved much differently. Alberta now has three times the population and 4.5 times the GDP of Saskatchewan. Would closer policy coordination close this gap and be beneficial to the people of Alberta and Saskatchewan? Or are the political preferences of their populations too diverse to allow greater co-operation?