adsorption of p-nitrophenol by three different activated carbons (f100, s.e.i. and b.d.h.) was carried out at 301 k and at controlled ph conditions. two different adsorption models (langmuir model and freundlich model) were studied and compared. the adsorption capacity of the carbons depends on the point of zero charge (pzc) and surface area of the carbons. adsorption of the solute at higher ph...

this study was carried out to obtain quantitative relationships between zn in equilibrium solution and that retained by 20 calcareous soils. soils were brought into equilibrium with varying solution concentrations of zn, and the amounts removed from solution were used to check the fit to six adsorption isotherms, namely, freundlich, langmuir, temkin, gunary, two surface langmuir and adjusted fr...

The adsorption of polyester onto organically modified silicas (ormosils) and (commercial) fumed silica has been compared utilising ToF-SIMS. The thermodynamics of each system was examined by constructing adsorption isotherm plots which indicated that the adsorption of polyester onto one of the modified silicas used may be a two stage process. Adsorption onto the fumed silica is in accord with t...

The magnetic NiFe2O4 nanoparticles have been synthesized and used as adsorbents for removal of an azo dye, Eriochrome black-T (EBT) from aqueous solution. The NiFe2O4 nanoparticles were characterized by scanning electron microscope (SEM), Transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectra (FTIR). The adsorption studies were carried out under v...

In this study, the adsorption of certain water-soluble cationic dyes, (basic blue 9, basic blue 12, basic blue 17, brilliant cresyl blue, janus green B, basic green 4, basic violet 1, basic violet 3, and thionin) onto TriSyl silicas by batch adsorption at 25◦C was investigated. In the adsorption experiments, Langmuir type adsorption in the Giles classification system was found. Binding paramete...

The adsorption characteristics of 4-chloro-2-nitrophenol (4C2NP) onto single-walled and multi-walled carbon nanotubes (SWCNTs and MWCNTs) from aqueous solution were investigated with respect to the changes in the contact time, pH of solution, carbon nanotubes dosage and initial 4C2NP concentration. Experimental results showed that the adsorption efficiency of 4C2NP by carbon nanotubes (both of ...

This paper describes the adsorption of two organic (acetic and citric) acids on the blast furnace sludge, a representative by-product of the steelmaking industry. By PIXE, XRD, BET and SEM methods, it was shown that blast furnace sludge is a complex heterogeneous material with a specific surface area of s = 31.46 m g, composed mainly of amorphous phase (w = 76.2 %), calcite (w = 9.9 %), magneti...

In this paper, the ability of coconut bunch waste (CBW), an agricultural waste available in large quantity in Malaysia, to remove basic dye (methylene blue) from aqueous solution by adsorption was studied. Batch mode experiments were conducted at 30 degrees C to study the effects of pH and initial concentration of methylene blue (MB). Equilibrium adsorption isotherms and kinetics were investiga...

Grape pomace (pulp and skins) was investigated as a new biosorbent for removing mycotoxins from liquid media. In vitro adsorption experiments showed that the pomace obtained from Primitivo grapes is able to sequester rapidly and simultaneously different mycotoxins. Aflatoxin B1 (AFB1) was the most adsorbed mycotoxin followed by zearalenone (ZEA), ochratoxin A (OTA), and fumonisin B1 (FB1), wher...

The biosorbent was obtained from municipal solid waste (MSW) of the Mostaganem city. Before use the MSW was dried in air for three days and washed several times. The sorption of yellow procion reactive dye MX-3R onto biomass from aqueous solution was investigated as function of pH, contact time and temperature. The adsorption capacity of MX-3R was 45.84 mg/g at pH 2-3 and room temperature. MX-3...