Recently interest in adsorption cooling systems has increased due to their capability to utilise low grade heat sources and environmentally friendly refrigerants. Currently, most of the commercially available adsorption cooling systems utilise granular packed adsorbent beds. Enhancing the heat transfer process inside the adsorbent bed will improve the overall efficiency of the adsorption system...

Populus alba is fast and auto- growing tree which profoundly accessible in around the world. The usage of the wastes of this tree would be admirable from environmental and solid waste management point of view. Thus, herein, this data set presents a facile method for providing an adsorbent from wastes of P. alba tree. The prepared adsorbent was modified by the cationic surfactant of (C16H33)N(CH...

The hydride gas of phosphine (PH3) is commonly used for semiconductor and optoelectronic industries. The local scrubbers must immediately abate it because of its high toxicity. In this study, copper (Cu) loaded on the sol-gel-derived gamma-alumina (Al2O3) adsorbents are prepared and tested to investigate the possibility of PH3 removal and sorbent regeneration. Test results showed that during th...

An investigation was conducted on the adsorption of oxymatrine (OMT) on a spherical cellulose adsorbent embedded with wattle bark tannin. The results showed that the adsorption of the OMT on the adsorbent was solution pH dependent and the adsorption process followed the Freundlich adsorption isotherm. The adsorption kinetics of the OMT on the adsorbent could be well described by the pseudo-seco...

This research investigates the effect of post-cure time on residual stresses in laminated composites. Laminated composites were made of T300 carbon fibers and epoxy resin. The post-cure process was carried out at the constant temperature of 120 °C for 6 and 12 hours for two specimens. The slitting method was employed to determine through-thickness residual stress distribution of the composite l...

Silanized-glass-particle adsorbent capacities are extracted from adsorption isotherms of human serum albumin (HSA, 66 kDa), immunoglobulin G (IgG, 160 kDa), fibrinogen (Fib, 341 kDa), and immunoglobulin M (IgM, 1000 kDa) for adsorbent surface energies sampling the observable range of water wettability. Adsorbent capacity expressed as either mass-or-moles per-unit-adsorbent-area increases with p...

in design and optimization process of laminated composite structures, the number of layers, layer angles, stacking sequence, material types and etc should be specified. each of aforesaid parameters can be applied as a design variable. in this paper the target is to minimize the weight of laminated composite pin loaded structures. the laminated composite structures are designed based on the load...

Protective clothing performs a vital role in maintaining the safety of human in workplace. The developments in this field are proceeding to fulfill the needs with multifunctional materials at competitive costs. Recently, the protective clothing field introduces the usage of composite materials taking advantage of their outstanding properties. In this paper, the multifunctional performance of hy...

A novel electro-thermal laminated ceramic composed of ceramic tile, carbon-based layer, dielectric layer, and foaming ceramic layer was designed and prepared by tape casting. The surface temperature achieved at an applied voltage of 10 V by the laminated ceramics was 40.3 °C when the thickness of carbon-based suspension was 1.0 mm and the adhesive strength between ceramic tile and carbon-based ...

The objective of the present study is to describe the results of research that has been conducted on the buckling behavior of rectangular laminated orthotropic plates that have a rectangular hole. As a result of using some geometrical holes which cause stress concentrations on laminated orthotropic plates, the analysis about the buckling coefficient of the elements become very important. This w...