the steel slag is the main by-product of steel industry. the aim of this study using the steel slag as a low-cost absorbent in order to remove cadmium pollutant from industrial wastewater. some factors that affect the process of cadmium removal by steel slag such as ph, contact time, absorbent dosage and cadmium initial concentration has been studied. standard solution of synthetic wastewater i...

In this study, bimodal meso-porous silica (UVM-7) synthesized and fabricated amino silane modified supports were characterized by powder X-ray diffraction (XRD), N2 adsorption/desorption, transmission electron microscope (TEM), elemental analysis and titration. Capacity of CO2 capture on modified bimodal pore structure silica at 70°C was calculated using breakthrough curves; and it was found th...

The kinetic study of methylene blue (MB) adsorption using acid-activated spent tea (AAST) as an adsorbent from aqueous solution with the aim of comparing linear and non-linear regression analysis methods was performed at varying initial MB concentrations (10-100 mg/l). Hence, spent tea leaves, which were activated using concentrated sulfuric acid, were prepared. The physicochemical characterist...

The potential of water hyacinth ash for phenol adsorption from aqueous solution was studied. Batch kinetic and isotherm studies were carried out under varying experimental conditions of contact time, phenol concentration, adsorbent dosage and pH. The adsorption of phenol decreased with increasing pH. The Freundlich and Langmuir adsorption models were used for the mathematical description of ads...

The contribution of variable grain sizes to uranium adsorption/desorption was studied using a sediment from the US DOE Hanford site. The sediment was wet sieved into four size fractions: coarse sand (1-2 mm), medium sand (0.2-1 mm), fine sand (0.053-0.2 mm), and clay/silt fraction (<0.053 mm). For each size fraction and their composite (sediment), batch and flow-cell experiments were performed ...

In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...

In this study the adsorption of Cu (II) ions from aqueous solutions on synthetic zeolite NaA was evaluated. The effect of solution temperature and the determination of the kinetic parameters of adsorption of Cu(II) from aqueous solution on zeolite NaA is important in understanding the adsorption mechanism. Variables of the system include adsorption time, temperature (293328K), initial solution ...

Pollution of water resources by various pollutants is nowadays a global environmental issue. Among the different type of water pollutants, dye represents a major polluting group. In this study, Azolla filiculides roots have been used for adsorption of Malachite Green (MG), a cationic dyed from aqueous solution. In this study, effects of operating parameters such as initial concentration of dye ...

In this study, nano-TiO2 was employed for the adsorption of chloroform from aqueous solution in batch equilibrium experiments to investigate its adsorption properties. The effects of pH, initial chloroform concentration and nano-TiO2 dosage were also investigated. Optimal conditions for chloroform removal by nano-TiO2 have been then identified. Results of equilibrium experiments showed that the...

the effective removal of dyes from aqueous wastewaters is among the most important issues formany industrialized countries. removal of congo red (cr) dye from aqueous solutions was studiedusing nickel oxide nanoparticles. the operating variables studied were initial ph of solution,adsorbents dosage, temperature and contact time. the morphological information of nickel oxidenanoparticles were ch...