intake system design as well as inlet ports and valves configuration is of paramount importance in the optimal performance of internal combustion engines. in the present study, the effect of inlet ports design is investigated on om-457la diesel engine by using a cfd analysis and the avl-fire code as well. a thermodynamic model of the whole engine equipped with a turbocharger and an intercooler ...

The current study demonstrates an experimental investigation of the tumble flow structures using Particle Image Velocimetry (PIV) under steady-state conditions considering the central vertical tumble plane. The experiments were carried out on a four-valve, pent-roof Gasoline Direct Injection (GDI) engine head at different valve lifts and with a pressure difference of 150 mmH2O across the intake...

Valve and con?ressor manufacturers have o=ten sought a means by which the time required to conduct compressor valve fatigue evaluations could be significantly reduced. Screening new concepts and improvements in design, processing and manufacture in a manner which proper+y simulates the compressor and produces realistic valve failure modes has often been a concern in initiating development activ...

This paper presents results of a numerical study of mixed convection and entropy generation of Cu–water nanofluid in a square ventilating cavity at different inclination angles. Except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. The inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall....

spatial measurements of conductivity, temperature and depth were used to study salinity variations along the principal channels of the tidal hypersaline creek network in the vicinity of bushehr port, persian gulf during three 25- tidal cycles in both warm and cold months. salinity variations and tidal fluctuations were out of phase throughout the short inverse estuary. the salinity values insid...

this paper presents results of a numerical study of mixed convection and entropy generation of cu–water nanofluid in a square ventilating cavity at different inclination angles. except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. the inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall. entr...

Spatial measurements of conductivity, temperature and depth were used to study salinity variations along the principal channels of the tidal hypersaline creek network in the vicinity of Bushehr Port, Persian Gulf during three 25- tidal cycles in both warm and cold months. Salinity variations and tidal fluctuations were out of phase throughout the short inverse estuary. The salinity values in...