Purpose. To calculate the temperature and velocity of nickel aluminum oxide particles in supersonic flow low-pressure cold gas-dynamic spraying nozzle. investigate effect gas parameters at nozzle inlet, particular pressure, on outlet.
 Research methods. The calculation temperature-velocity characteristics powder is performed after determining channel using well known dependencies. initial ...

This report describes three 2400-MW(t) reference point designs for the moltencoolant gas cycle (MCGC), based on the current power conversion unit (PCU) designs for the GT-MHR. A very-high-temperature helium cycle with a 900°C turbine inlet temperature achieves a thermodynamic efficiency of 54% and net electric output of 1300 MW(e), while a low-temperature helium cycle with a 600°C turbine inlet...

Annular gas-liquid two phase flow is widely encountered in the nuclear industry. Various combinations of techniques have been employed in annular gas-liquid two phase flows to measure the flow parameters (e.g. liquid film thickness, gas volume fraction and the phase flow rates). One of the most useful techniques which has proven attractive for many multiphase flow applications is the electrical...

Annular gas-liquid two phase flow is widely encountered in the nuclear industry. Various combinations of techniques have been employed in annular gas-liquid two phase flows to measure the flow parameters (e.g. liquid film thickness, gas volume fraction and the phase flow rates). One of the most useful techniques which has proven attractive for many multiphase flow applications is the electrical...

The chemical vapor deposition of polycrystalline carbon nitride in stagnation flow reactors is simulated. A model is used to predict the gas phase chemistry, temperature and velocity profiles, potential gaseous film growth precursors, and to evaluate the likelihood of bond rearrangement occurring in the bulk phase or on the deposition surface once the gaseous precursors are adsorbed. Numerical ...

This paper presents the experimental as well as the simulated performance studies on the transcritical CO2 heat pumps for simultaneous water cooling and heating; effects of water mass flow rates and water inlet temperatures of both evaporator and gas cooler on the cooling and heating capacities, system COP and water outlets temperatures are investigated. Study shows that both the water mass flo...

Combustion instabilities in gas turbine has been a major setback in the quest for efficient and clean combustion. Accurate characterisation and prediction of these disturbances is required to suppress them either at the design stage or in a close loop control when the system is in operation. The use of flame transfer functions has been a common approach in different literatures. Flame temperatu...

The increasing use of fuels derived from oil, deepens concern about the fact that non-fossil fuels have to be considered as the fuels of the future. Among the alternatives, hydrogen produced from the abundant sources of water, seems to be one of the best, but it suffers drawbacks with regard to combustion, storage and transportation. The other alternatives are ammonia, produced from unlimited s...

Performance of a gas turbine mainly depends on the inlet air temperature. The power output of a gas turbine depends on the flow of mass through it. This is precisely the reason why on hot days, when air is less dense, power output falls. The objective here is to assess the advanced systems applied in reducing the gas turbine intake air temperature and examine the merits from integration of the ...

Due to the importance of power generation cycles including combined cycle, many studies have been done in recent years and many researchers have been tried to optimize these cycles by using of existing methods. In this study, the Water-Ammonia cycle is investigated in the combined-cycle of the Water-Ammonia, working dual Water-Ammonia mixture is used as the works fluid. This cycle can be used f...