In this study, the optimum thickness of thermal insulation used to reduce heat gain and losses in buildings is investigated under dynamic thermal conditions by using the climatic conditions of Elazığ, Turkey. Numerical method based on an implicit finite difference procedure which has been previously validated is used to determine yearly cooling and heating transmission loads, yearly averaged ti...

1.1 The computer programs included in this practice provide a calculational procedure for predicting the heat loss or gain and surface temperatures of insulated pipe or equipment systems. This procedure is based upon an assumption of a uniform insulation system structure, that is, a straight run of pipe or flat wall section insulated with a uniform density insulation. Questions of applicability...

in this paper, turbulent mixed convective heat transfer of water and al2o3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. for the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. the coupling of pressure and veloci...

Abstract The temperature-stress state of the concrete facade wall with a window opening, which is external enclosing structure room steel heating device, was investigated by method numerical modeling. Estimated studies were performed for winter period when system building functioning. According to results solving equations thermal stress and equation conductivity, temperature distribution over ...

In this paper, Turbulent mixed convective heat transfer of water and Al2O3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. For the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. The coupling of pressure and veloci...

Thermal insulation gypsum plaster was prepared from flue gas desulphurization (FGD) gypsum. K12 is more recommendable as foaming agent, when the mass fraction of K12 is around 0.1 %, the setting time and compressive strength meet the requirements of gypsum-based construction materials. In the meanwhile, the thermal conductivity is 0.18 W m−1 K−1, which can be used as a thermal insulation materi...

Development of effective electrical magnetohydrodynamic (MHD) coating insulating induced current path is one of key fusion technologies for fusion blanket research and development. Electrical insulation coating is extremely important for lead lithium (PbLi) MHD thermofluid study from pointview of secure electric insulating wall condition. The alumina (Al2O3) coatings fabricated by a sol-gel met...

This work investigates an eddy current-based non-destructive testing (NDT) method to characterize corrosion of pipes under thermal insulation, one of the leading failure mechanisms for insulated pipe infrastructure. Artificial defects were machined into the pipe surface to simulate the effect of corrosion wall loss. We show that by using a giant magnetoresistance (GMR) sensor array and a high c...

External thermal insulation systems often have durability problems, including cracking, hollowing, and falling off, which seriously affect safety energy-saving effects. Based on finite element theory using ANSYS software, this paper studies the distribution law of temperature field stress external system. It was found that, compared with an uninsulated wall, substrate in summer reduced by 52.9%...