Harmonic number Frequency Number of klystrons Power per klystron Number of five-cell cavities (aluminum) Shunt impedance per unit length Total shunt impedance Rst Natural bunch length (uz) Momentum compaction factor Current per beam Luminosity Synchrotron radiation loss per turn Parasitic mode energy loss per turn* Peak cavity voltage VP** Total RF power Fundamental mode cavity dissipation PC S...

With the rapid development of wireless communication systems, the multiple separated frequency bands antenna has become one of the most important circuit elements and attracted much interest. In order to satisfy the IEEE 802.11 WLAN standards and the worldwide interoperability for microwave access (WiMAX) bands, various antennas for wide band operation have been studied for communication and ra...

With the rapid development of wireless communication systems, the multiple separated frequency bands antenna has become one of the most important circuit elements and attracted much interest. In order to satisfy the IEEE 802.11 WLAN standards in the 2.4 GHz (2400–2484 MHz)/5.2 GHz (5150–5350 MHz)/5.8 GHz (5725–5825 MHz) operating bands and the worldwide interoperability for microwave access (Wi...

Passive radio frequency identification (RFID) systems deployment efforts are revolutionizing supply chain logistics by providing unprecedented supply chain visibility. The widely used bandwidth of operation in modern systems is the UHF ISM (industrial, scientific, and medical) band. The performance of UHF RFID systems are largely reliant on low power CMOS circuits, efficient power rectification...

Negative-index metamaterials (NIMs) at near infrared wavelengths (~2 mum) are fabricated with circular, elliptical and rectangular holes penetrating through metal/dielectric/metal films. All three NIM structures exhibit similar figures of merit; however, the transmission is higher for the NIM with rectangular holes as a result of an improved impedance match with the substrate-superstrate (air-g...

Power flow control is one of the most important issues for operating the inverter-dominated autonomous microgrid. A technical challenge is how to achieve the accurate active/reactive power sharing of inverters. P-F and Q-V droop control schemes have been widely used for power sharing in the past decades. But they suffer from the poor power sharing in the presence of unequal line impedance. In o...

This study presents a novel miniaturized dual-band coupled-line impedance transformer. This dual-band matching technique uses the characteristics of coupled-line and dual-band stubs to realize matching arbitrary complex impedance to arbitrary complex impedance at two arbitrary uncorrelated frequencies. Especially, it satisfies the demand of dual-band matching at two relatively closed operating ...

Second-harmonic control is implemented in a balanced common-emitter configuration to facilitate frequency-independent third-order intermodulation distortion cancellation. Moreover, this circuit configuration facilitates a simultaneous match for either power and linearity or noise and linearity. Experiments demonstrated an improvement of over 15 dB in the output third-order intercept point while...

Yi-Fang Lin; Shu-An Yeh; Hua-Ming Chen; SueWei Chang, "Design of an Omnidirectional Polarized RFID Tag Antenna for Safety Glass Applications," Antennas and Propagation, IEEE Transactions on , vol. 60, no. 10, pp. 4530,4537, Oct. 2012 Reich, M. T. ; Bauer-Reich, C. , "UHF RFID impedance matching: When is a T-match not a T-match?," RFID (IEEE RFID), 2014 IEEE International Con...

This paper presents an impedance-matching-based control scheme for the harmonic resonance damping of multiple grid-connected-converters (GCCs) with LCL filters. As indicated in this paper, harmonic resonance occurs if a GCC possesses an output impedance that is not matched with the rest of the network in some specific frequency bands. It is also revealed that the resonance frequency is associat...