Applying the voltage-mode hysteretic control to multiphase Voltage Regulator Modules (VRMs) can satisfy many of the new and future generation of microprocessors and ICs powering requirements. This is because of the numerous advantages that can be obtained when both techniques are used. However, several challenges arise that include current sharing, multiphase control signals distribution, high-...

A big problem in many technical applications is the complex hysteretic characteristic of sensors and actuators, which causes a non-linear and multi-valued mapping between the output variable and the input variable of the transducer. In the last few years at the LPA a general modeling and compensator design method was developed for such complex hysteretic nonlinearities which is based on the so-...

Hysteresis is a common phenomenon in various non linear systems including piezoceramic materials. Piezoelectric bimorph devices show hysteretic behaviour, when operating as actuators. In this paper an experimental set-up to investigate the hysteretic behaviour of a PZT is described. The strategy adopted uses a resistive readout scheme and a CCD tool for the system calibration. Moreover, softwar...

In a system with hysteresis, the system response lags the excitation [16, 21] — for any excitation [10]. Hysteretic behavior is commonly depicted as loops in graphs (2D plots) of periodic (oscillatory) output vs. periodic input. In rate-dependent hysteresis, the size and shape of the hysteresis loop changes with the rate or frequency of the input. If the loop collapses to a function (e.g., a cu...

Piezoelectric, magnetostrictive, and shape memory alloy actuators are gaining importance in high-frequency precision applications constrained by space. Their intrinsic hysteretic behavior makes control difficult. The Prandtl–Ishlinskii (PI) operator can model hysteresis well, albeit a major inadequacy: the inverse operator does not exist when the hysteretic curve gradient is not positive defini...

We theoretically study and experimentally report the propagation of nonlinear hysteretic torsional pulses in a vertical granular chain made of cm-scale, self-hanged magnetic beads. As predicted by contact mechanics, the torsional coupling between two beads is found to be nonlinear hysteretic. This results in a nonlinear pulse distortion essentially different from the distortion predicted by cla...

We report on the numerical and theoretical study of the subcritical bifurcation of parametrically amplified waves appearing at the interface between two immiscible incompressible fluids when the layer of the lower fluid is very shallow. As a critical control parameter is surpassed, small amplitude surface waves bifurcate subcritically toward highly nonlinear ones with twice their amplitude. We ...

This study focuses on performance of H-shaped steel beams to CFT column rigid connections. To this end, the effects of internal and external stiffeners on hysteretic behavior of connections were studied. Comparative numerical analyses carried out on eight different connections. To this end finite element models were prepared using ANSYS and nonlinear cyclic analyses carried out. Results of this...

The coupling beam damper is a fundamental energy dissipation component in coupling shear wall structures that directly influences the performance of the shear wall. Here, we proposed a two-fold design method that can give better energy dissipation performance and hysteretic behavior to coupling beam dampers. First, we devised four in-plane yielding coupling beam dampers that have different open...

In order to improve the energy dissipation of the masonry infilled frame structure while decreasing the stiffening and strengthening effects of the infill panels, a new dry stacked panel (DSP) semi-interlocking masonry (SIM) infill panel has been developed. In this paper, the material properties of DSP and a traditional unreinforced masonry (URM) panel have been evaluated experimentally. A seri...