the present work studied the application of membrane bioreactor (mbr) for tapioca wastewater processing that contained chemical oxygen demand (cod) ranging from 4000-9000 mg/l. a preliminary study was initially conducted in order to evaluate membrane performance with respect to its flux with mlss concentration ranging from 4,500 to 10,500 mg/l. it was clear that fouling was observed during the ...

Gaseous microemboli (GME) are an abnormal physiological occurrence during cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO). Several studies have correlated negative sequelae with exposure to increased amounts of GME. Hypobaric oxygenation is effective at eliminating GME in hollow-fiber microporous membrane oxygenators. However, hollow-fiber diffusion membrane oxygenators, w...

A multichannel mixed-conducting hollow fiber (MMCHF) membrane, 0.5 wt % Nb2O5-doped SrCo0.8 Fe0.2O3-d (SCFNb), has been successfully prepared by phase inversion and sintering technique. The crystalline structure, morphology, sintering behavior, breaking load, and oxygen permeability of the MMCHF membrane were studied systematically. The MMCHF membrane with porous-dense asymmetrical microstructu...

A microporous polypropylene (PP) hollow fiber membrane contactor was used as a reactor to biodegrade phenol in high-salinity solutions by Pseudomonas putida CCRC14365 at 30C. Suspended cells grew only at a NaCl concentration below 2.5 wt%. On the other hand, cells within hollow fibers completely degraded 0.5 g/L of phenol in solution containing NaCl up to 8.6 wt%, likely due to the fact that th...

There is little information showing the use of microporous polypropylene hollow fiber oxygenators during extra-corporeal life support (ECLS). Recent surveys have shown increasing use of these hollow fibers amongst ECLS centers in the United States. We performed a retrospective analysis comparing the Terumo BabyRx hollow fiber oxygenator to the Medtronic 800 silicone membrane oxygenator on 14 ne...

The study of the stress distribution on a hollow cylindrical fiber placed in a composite material is considered in this work and an analytical solution for this stress distribution has been constructed. Finally some parameters such as fiber’s thickness and fiber’s length are considered and their effects on the distribution of stress have been investigated. For finding the governing relations, c...

• The air gap effect on PVDF hollow fiber membranes is much more evident for the dope solution with the high PVP concentration than low PVP concentration. • Large macro-voids/cavities in PVDF hollow fiber membranes are suppressed to the finger-like macro-voids and the separation layer is thickened when increasing PVP concentration in dope solution. • The hydrophilicity and viscosity of polymer ...

The present work studied the application of membrane bioreactor (MBR) for tapioca wastewater processing that contained chemical oxygen demand (COD) ranging from 4000-9000 mg/L. A preliminary study was initially conducted in order to evaluate membrane performance with respect to its flux with MLSS concentration ranging from 4,500 to 10,500 mg/L. It was clear that fouling was observed during the ...