In this study, a total of 6 different composites were obtained by adding 5%, 10% and 15% chopped aramid fiber reinforcement in mm dimensions to each the polypropylene polyethylene matrix elements under same production method conditions. The materials mixed using extrusion then formed into plates press molding technique. Tensile charpy tests these performed their mechanical properties examined. ...

Mechanical properties of hybrid braided composite rebars are evaluated and compared to theoretical predictions which account for specific processing parameters including yarn size, braiding machine setup, and fiber type. Using a combination of high modulus carbon (Thornel P-55S) and aramid (Kevlar 49) fibers bars have been produced of up to 10 mm diameter with a Young's modulus of 200 GPa, a bi...

fiber reinforced concrete (frc) has been widely used due to its advantages over plain concrete such as high energy absorption, post cracking behaviour, flexural and impact strength and arresting shrinkage cracks. but there is a weak zone between fibers and paste in fiber reinforced concretes and this weak zone is full of porosity, especially in hybrid fiber reinforced concretes. so it is necess...

The use of fiber reinforced polymer (FRP) U-wrap to rehabilitate concrete beams has increased in popularity over the past few years. As such, many design codes and guidelines have been developed to enable designers to use of FRP for retrofitting reinforced concrete beams. FIB is the only guideline for design which presents a formula for torsional capacity of concrete beams streng...

The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...

Recent advancements in metal fibers have introduced a promising new type of stainless steel fiber with high stiffness, high failure strain, and a thickness < 100 μm (<0.00394 in.) that can be utilized in a steel fiber-reinforced polymer. However, stainless steel is known to be susceptible to pitting corrosion. The main goal of this study is to compare the impact of corrosion on the mechanical p...

fi ber reinforced plastic (FRP) re. nforcement is one of the most promising new developments for concrete structures. FRP reinforcing elements provide lighter, easier to assemble, and more durable structures that are free of the deterioration caused by corrosion of steel. FRPs consist of synthetic or organic highstrength fibers, most of which are impregnated with a resin matrix. They are availa...

Fibre-reinforced polymer(FRP), also Fibre-reinforced plastic, is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass, carbon, or aramid, al‐ though other fibres such as paper or wood or asbestos have been sometimes used. The poly‐ mer is usually an epoxy, vinylester or polyester thermosetting plastic, and phenol formaldehyde resins are still in use...

Thermo-set based composites using epoxy resin systems currently dominate the composite industry. Glass-reinforced epoxy composites are extensively used in the structural composites of aircraft industry due to low shrinkage, ease of fabrication, chemical resistance, and higher mechanical and electrical properties. The above characteristics coupled with techno-economic considerations are mainly r...

Thermo-set based composites using epoxy resin systems currently dominate the composite industry. Glass-reinforced epoxy composites are extensively used in the structural composites of aircraft industry due to low shrinkage, ease of fabrication, chemical resistance, and higher mechanical and electrical properties. The above characteristics coupled with techno-economic considerations are mainly r...