a general overview on the prospective of various oxidation and combined processes in the treatment of tannery industry effluent are reported. various oxidation and combined processes such as uv/h2o2/hypochlorites, fenton and electro-oxidation, photo-chemical, photo-catalytic, electro-catalytic oxidation, wet air oxidation, ozonation, biological followed by ozone/uv/ h2o2, coagulation or ele...

background: toluene is a volatile organic compound, one of 189 hazardous air pollutants (hap s ) and the most important pollutant found in most industries and indoor environments; owing to its adverse health, toluene must be treated before being released into the environment. methods : in this research study, a continuous-flow system (including an air compressor, silica gel filters and activate...

The Cu/Al2O3 catalyzed ozonation for degrading an endocrine disruptor—alachlor in water was investigated. The Cu/Al2O3 powders were coated on a cordierite honeycomb column, which was taken as the reactor of catalytic ozonation of alachlor. Additional uncatalyzed experiments were carried out and the results were compared to those of the catalytic runs. The experimental results demonstrated that ...

Catalytic ozonation is a non-selective mineralization technology of organic matter in water by using active free radicals generated ozone degradation. can be divided into homogeneous catalytic reactions metal ions as catalysts and heterogeneous solid catalysts. Homogeneous has many problems, such low rate, secondary pollution caused the introduction utilization efficiency oxidants, which limit ...

Introduction: Ammonia in form of ammonium ions is toxic and could decrease the dissolved oxygen in water and endanger the aquatic life. The aim of this study is the removal of ammonium using oxidation and adsorption by catalytic ozonation and clinoptilolite zeolite, respectively. Methods: The research method is Experimental. First, optimal pH of ammonium adsorption on carbon catalyst (5 g/L), ...

In this study, a new strategy in catalytic ozonation removal method for degradation of phenol from industrial wastewater was investigated. Magnetic carbon nano composite as a novel catalyst was synthesized, characterized and then used in the catalytic ozonation process (COP) and compared with the single ozonation process (SOP). The influential parameters were all investigated. The results showe...

The current study aimed to examine the overall feasibility of the use of copper oxide nanoparticles (CuO-NPs) as a catalyst in ozonation process for the removal of benzene from aqueous solutions under experimental conditions. This experimental study was conducted on a laboratory scale reactor in a semi-batch mode. The effect of critical operating parameters such factors as pH, concentration of ...