Glass fibre reinforced plastic (GFRP) is considered as structure support and insulating material for the new superconducting FAIR magnets. GFRP (G11) is a composite material consisting of woven glass fibres (volume fraction ~50 %) and cured polymer resin (e.g. amine-cured epoxy). The material will be exposed to cryogenic temperatures, high radiation levels and dynamic mechanical loads (Lorentzi...

Experimental investigation of GFRP (glass fiber reinforced polymer) tubes that were filled with magnetically driven concrete was carried out to study the flexural behavior of specimens under bending. Specimens having different cross section and lengths were tested. The test specimens were fabricated by filling magnetically driven concrete into the GFRP tubes and the concrete was vibrated using ...

Embedding FBG strain sensors within a GFRP sandwich composite material allows early detection of internal defects. However, the sensors need to survive the manufacturing process to provide this capability. Vacuum infusion is commonly used to manufacture GFRP sandwich composite materials but, it needs to be modified to accommodate the embedding process. A stage by stage procedure is demonstrated...

This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...

The purpose of this study was to propose a new numerical modeling of the glass fiber cloth reinforced denture base resin (GFRP). The proposed model is constructed with an isotropic shell, beam and orthotropic shell elements representing the outmost resin, interlaminar resin and glass fiber cloth, respectively. The proposed model was applied to the failure progress analysis under three-point ben...

A far-field airborne radar (FAR) nondestructive testing (NDT) technique integrating inverse synthetic aperture radar (ISAR) measurements and a backprojection algorithm for the condition assessment of glass fiber reinforced polymer (GFRP)–wrapped concrete structures is proposed. The method is directed toward the detection of near-surface defects and delaminations located in the vicinity of GFRP–...

The axial compressive strength of unidirectional FRP made by pultrusion is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. A theoretical iterative calculation approach was suggested to predict the ultimate axial compressive stress of the combined structure and analyze the influences of geometr...

background: nail disorders comprise approximately 10% of all dermatological conditions. abnormalities in the color of nails are called ungal dyschromia or chromonychia. ungual dyschromia may be endogenous or exogenous. yellow discoloration of the nails has been reported during the last years as separate observation related to drug administration, during hemodialysis and associated with pulmonar...

In this study, twenty glass fiber reinforced polymer (GFRP) reinforced concrete specimens were modelled using finite element method to predict the effect of GFRP compressive bars on the flexural strength and ductility of GFRP reinforced concrete beams. Also, the contribution of GFRP longitudinal rebars to the load-carrying capacity of reinforced concrete columns is determined. The concrete elas...

The effects of acid treatment, vapor grown carbon fiber (VGCF) interlayer and the angle, i.e., 0° and 90°, between the rolling stripes of an aluminum (Al) plate and the fiber direction of glass fiber reinforced plastics (GFRP) on the mode II interlaminar mechanical properties of GFRP/Al laminates were investigated. The experimental results of an end notched flexure test demonstrate that the aci...