In this study, the effects of injection pressure and timing on the performance and emission characteristics of a DI diesel engine using methanol (5%, 10% and 15%) blended-diesel fuel were investigated. The tests were conducted on three different injection pressures (180, 200 and 220 bar) and timings (15 , 20 , and 25 CA BTDC) at 20 Nm engine load and 2200 rpm. The results indicated that brake s...

Compression Ignition (CI) engines are widely used for transportation, agriculture, power generation and industrial applications. The conventional fuel for CI engine is petro diesel. Among the countries in the world, India is one of the largest consumers of petro diesel fuel. Indian economy is very much dependant on the consumption of petro diesel. Brake thermal efficiency, brake specific fuel c...

various combustion characteristics and properties are studied while selecting a fuel for any engine. the choice of the engine and fuel are highly interrelated. vegetable oil is one obvious fuel particularly because their fuel properties are closer to diesel fuel. two important properties, the cetane number and the calorific value are similar to diesel. hence diesel engines can be operated on ve...

Application of Compressed Natural Gas (CNG) in diesel engines has always been important, especially in the field of automotive engineering. This is due to easy accessibility, better mixing quality and good combustion characteristics of the CNG fuel. In this study the application of CNG fuel along with diesel oil in a heavy duty direct-injection automotive diesel engine is experimentally investi...

this paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection cng engine. the objective of this study was to review the previous research in the development of gaseous fuel injector for port injection cng engine converted from diesel engine. next, a simulation of the fuel flow of the new injector nozzle was made using flu...

in this work, result of experimental investigation on interaction of fuel spray generated by a swirled type injector, with air motion in a prototype cylinder are presented. experiments were carried out by planar imaging and particle image velocimetry (piv) techniques in order to provide information about the spray structure evolution and instantaneous velocity distribution of air motion and fue...

Use of biodiesel as an alternative to diesel could reduce the dependency on petroleum products and the pollution problem. The physical properties of the fuel such as viscosity, volatility and f lash point also affect the combustion process, thereby engine performance. Specif ically atomization of the fuel during the injection is attributed to higher viscosity of biodiesel. Injec ted fuel drople...

An experimental study is performed to investigate the fuel impingement on cylinder walls and piston top inside a directinjection spark-ignition engine with optical access to the cylinder. Three different fuels, namely, E85, E50 and gasoline are used in this work. E85 represents a blend of 85 percent ethanol and 15 percent gasoline by volume. Experiments are performed at different load condition...

The purpose of this study is to investigate the effect of injection parameters on a heavy duty diesel engine performance and emission characteristics. In order to analyze the injection and spray characteristics of diesel fuel with employing high-pressure common-rail injection system, the injection characteristics such as injection delay, injection duration, injection rate, number of nozzle hole...

The purpose of present paper is simulation a direct injection stratified charge natural gas engine. The KIVA-3V code was used for gaseous fuel injection simulation. Compression and expansion stroke of engine cycle is simulated using KIVA-3V code. In cylinder fuel equivalence ratio distribution criterion is used for studying mesh independency. The results show that 550000 cells number is suff...