Accurate estimation of saturation flow rate is a prerequisite for accurate estimation of level of service and delays of signalized intersections. Saturation flow rate of intersections depends on many factors, including traffic behavior and culture. One of the important problems of traffic behavior in Iran is the violation of law at the physical region of intersections. The main purpose of this ...

objective(s):the aim of this study was to improve flowability and compressibility characteristics of starch to use as a suitable excipient in direct compression tabletting. quasi-emulsion solvent diffusion was used as a crystal modification method. materials and methods: corn starch was dissolved in hydrochloric acid at 80˚c and then ethanol as a non-solvent was added with lowering temperature ...

The steady-state fully-developed laminar flow of non-Newtonian power-law fluids is examined in a circular microchannel with slip boundary condition and under an imposed constant wall heat flux. Effects of slip as well as the hydrodynamic and thermal key parameters on heat transfer and entropy generation are investigated. The results reveal that increasing the Brinkman number and the flow behavi...

The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...

Gas motion within the cylinder is one of the major factors that control the combustion process in spark ignition engine. It also has significant impact on heat transfer. Both the bulk gas motion and the turbulence characteristics of the flow are important and governing the overall behavior of the flow. An arrangement for obtaining a stratified charge, using port injection, is proposed for a ...

The present paper investigates the effects of the trapezoidal teeth labyrinth seal on the leakage amount in gas turbines. The influences of increasing the number of teeth from 1 to 6 with step 1 and the tip clearance s=0.5 to 7.5 mm on the leakage flow at different pressure ratios of PR=1.5, 2 and 2.5 are examined, comprehensively. The analysis is performed numerically using a Finite-Volume...

geotextiles are one of the most widely used synthetic materials in filtration and drainage applications. since in real applications, geotextiles are subjected to various hydraulic gradients and confining stresses, hydraulic behavior of geotextiles under different circumstances is of great practical importance. in this study filtration and drainage properties of several nonwoven needle-punched g...