This paper developed three-dimensional (3D) Finite Element Analysis (FEA) to investigate the effect of fibre lay-up on the initiation of failure of laminated composites in bending. TsaiHill failure criterion was applied to identify the critical areas of failure in composite laminates. In accordance with the 3D FEA, unidirectional ([0]16), cross-ply ([0/90]4s) and angle-ply ([±45]4s) laminates m...

First-ply failure (FPF) of composite thin-walled columns and frames is investigated in the buckled structure. Elastic behavior is assumed during the pre-buckling and buckling states, and along part of the post-buckling equilibrium path. The Tsai-Hill criterion is employed to identify failure of one ply at one specific location. The technique of analysis is based on evaluation of the post-buckli...

Abstract In the present investigation, laminated composite beams subjected to a bending static loading are studied in order determine their failure mechanisms and first ply (FPF) load. The FPF analysis is performed using refined rectangular plate element. element formulated based on classical lamination theory (CLT) calculate in-plane stresses. To achieve this goal, several criterions, includin...

The introduction of carbon-fibre reinforced plastics in load bearing automotive structures provides a great potential to reduce vehicle weight and fuel consumption. A reduction in overall manufacturing cost can be realised through part integration and use of cost-effective materials such as heavy tow carbon fibre. There is a current drive within the automotive industry to develop the technologi...

This report discusses the development and application of two alternative strategies in the form of global and sequential local response surface (RS) techniques for the solution of reliability-based optimization (RBO) problems. The problem of a thin-walled composite circular cylinder under axial buckling instability is used as a demonstrative example. In this case, the global technique uses a si...

An approximate method is presented to investigate Mgy the interlaminar stresses near the free edges of composite N laminate plates that are subjected to a combined NI~ thermo-mechanical loading. The method is based upon N~ admissible function representations of stresses which account Q!~) for the effects of both the global mismatches and the local ,~!k/ mismatches in two of the elastic properti...

In the present study experimental and numerical investigations were carried out to predict the low velocity impact response of four symmetric configurations: 10 ply E Glass, 10 ply AS4 Carbon, and two Hybrid combinations with 1 and 2 outer plies of E Glass and 8 and 6 inner plies of Carbon. All numerical investigations were performed using commercial finite element software, LS-DYNA. The test c...

BACKGROUND Capsule and pneumolysin (PLY) are two major virulence factors of Streptococcus pneumoniae. S. pneumoniae is one of the leading causes of bacterial endophthalmitis. The aim of this study is to determine whether passive immunization with the 23-valent pneumococcal polysaccharide vaccine (Pneumovax® 23; PPSV23) or PLY protects against pneumococcal endophthalmitis. METHODS New Zealand ...