A fully-coupled thermoelastic model for a fixed pad thrust bearing has been developed. Pressure, film thickness and three-dimensional temperature profiles were obtained by simultaneously solving the Reynolds, film thickness, energy and force balance equations using a combined finite difference and finite element method. The elastic deformation due to the pressure and the thermal distortion due ...

To realize a high-temperature capacitor, uniaxially (001)-oriented CaBi4Ti4O15 films with various film thicknesses were prepared on (100)cSrRuO3/Ca2Nb3O10(-) nanosheet/glass substrates. As the film thickness decreases to 50 nm, the out-of-plane lattice parameters decrease while the in-plane lattice ones increase due to the in-plane tensile strain. However, the relative dielectric constant (εr) ...

Articles you may be interested in Asymmetrical degradation behaviors in amorphous InGaZnO thin-film transistors under various gate and drain bias stresses Investigation on the negative bias illumination stress-induced instability of amorphous indium-tin-zinc-oxide thin film transistors Appl. Temperature dependence of negative bias under illumination stress and recovery in amorphous indium galli...

in this research, tellurium (te) film with thicknesses of 100-250 nm were deposited on ceramic substrates by thermal evaporation at 373 k. the thickness of the film was determined by rutherford backscattering spectroscopy. the influence of the thickness on the structural, morphological and molecular bonds was characterized using xrd, scanning electron microscope, and raman spectroscopy. the xrd...

introduction: the image quality as well as film speed is influenced by the film processing conditions. different combinations of films and processing methods affect the diagnostic accu-racy. temperature and developer exhaustion result in different image quality. the purpose of this study was to evaluate the influence of film type and processing conditions on caries detec-tion.  material and met...

In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...

in order to investigate the effect of temperature and time of blanching process on the generation and extraction of reducing sugars and kinetics of color changes during blanching, the potato strips packaged in the polyethylene (hdpe with 10 micron thickness) film or without polyethylene packaging, were immersed in distilled water at temperature range of 50, 60, 70, 80 and 90 ºc for 120 minutes....

the thin gelatin films, prepared by casting of gelatin solutions at different drying temperatures, had different molecular morphologies as monitored, using wide angle x-ray diffraction (waxd) and differential scanning calorimetry (dsc) techniques. it was revealed that gelatin films dried at lower temperatures showed markedly higher crystalline or helical structure with slightly higher tg and lo...

Full-perovskite Pb0.87Ba0.1La0.02(Zr0.6Sn0.33Ti0.07)O3 (PBLZST) thin films were fabricated by a sol-gel method. These revealed both rhombohedral and tetragonal phases, as opposed to the full-tetragonal phase previously reported in ceramics. The fractions of tetragonal and rhombohedral phases are found to be strongly dependent on film thickness. The fraction of tetragonal grains increases with i...