introduction: the aim of this in vitro study was to evaluate the effect of mta-based sealer (mta fillapex), eugenol-based sealer (dorifill) and an epoxy resin sealer (ah plus) on the bond strength of fiber posts cemented with a self-etch adhesive. materials and methods: the root canals of 72 maxillary incisors were prepared using the step-back technique after removing/cutting off the crowns. th...

objective: the aim of this in vitrostudy was to evaluate the effect of the type of solvent in silane solution on microtensile bond strength of fiber posts to composite resin cores af-ter application of 24% hydrogen peroxide. materials and methods: eighteen white fiber posts, immersed in 24% hydrogen peroxide were divided into three groups (n=6). in the group a post surfaces were silanized with ...

In fiber concretes, microcracks in the boundary area between the cement paste and the surface of aggregates or fibers are higher. Natural and artificial pozzolans can be used for reinforcing this area. In this research, the combination of glass fiber, zeolite, and nano silica particles were used in lightweight self-compacting concrete containing scoria. Fiber volume fractions between 0% to 1.5%...

Background and Aim: Debonding is the most commonly encountered failure in teeth restored with fiber posts that mainly occurs at the weakest interface (dentin-cement interface). Thus, reinforcement of this interface is mandatory. The aim of this study was to evaluate the effect of different root dentin surface treatments after post space preparation on bond strength of fiber posts cemented with ...

background and aim: this study investigated the reinforcing effect of silica nanoparticles when incorporated into the matrix phase of an experimental dental fiber reinforced composites (frc) through the evaluation of the flexural properties of the composites. materials and methods: in this experimental study frc samples were divided into two main groups (containing two or three bundles) either ...

this paper presents the results of analytical studies concerning the flexuralstrengthening of reinforced concrete beams by external bonding of high-strength lightweightcarbon fiber reinforced plastic (cfrp) plates to tension face of the beam. three groups of beamswere tested analytically and compared with existing experimental results. results of the numericalanalyses showed that, although addi...

background : denture fracture is an unresolved problem in complete denture prosthodontics. however, the repaired denture often experiences a refracture at the repaired site due to poor transverse strength. hence, this study was conducted to evaluate the effect of joint surface contoursand glass fiber reinforcement on the transverse strength of repaired acrylic resins. materials and methods: a t...

Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...

Tensile strength, Young's modulus, and toughness of electrospun nylon 6 non-woven fiber mats were improved by increasing individual nanofiber strength and fiber-fiber load sharing. Single-walled carbon nanotubes (CNTs) were used as reinforcement to increase the strength of the electrospun nylon 6 nanofibers. Young's modulus, tensile strength, and toughness of the nylon 6 non-woven fiber mats el...

Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...