The paper illustrates the application of a combined adaptive particle swarm optimization (A-PSO) algorithm and the finite strip method (FSM) to the lay-up optimization of symmetrically fiber-metal laminated (FML) composite shallow shell panels for maximizing the fundamental frequency. To improve the speed of the optimization process, adaptive inertia weight was used in the particle swarm optimiz...

Composite materials such as fiber metal laminates combine the advantages of metallic and fiber-reinforced polymers. Hence, these are great interest for thin-walled structures in lightweight engineering. Due to structure materials, damage laminate components occur more frequently inside than with conventional materials. Since detection interlaminar is complicated compared external damage, it one...

In this work, the mode I fracture toughness of dissimilar metal-composite adhesive joints is experimentally investigated using double cantilever beam (DCB) test. The particular joint under study resulted by joining a thin titanium sheet with carbon fiber reinforced plastic (CFRP) laminate and envisioned to be implemented in hybrid laminar flow control system future aircraft. Four different indu...

in this study, the possibility of producing wood-plastic panels was studied using two different blending methods including melt blend and dry blend. wood-plastic panels were made from recycled high density polyethylene (as resin) and mdf waste (as natural fiber) at 60, 70 and 80% by weight filler loading. nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm, respectively. the...

TIlls paper describes the design and manufacture of a multifunctional space structure. The analytical techniques used in this project included thermal analyses of structures in various earth orbits, determination of structural requirements from optical performance calculations, designing of near zero Coefficient of Thermal Expansion (CTE) laminates, consideration of manufacturing and material v...

The aim of this study is to investigate effects of isothermal aging on mechanical properties of fiber metal laminates (FMLs) and glass/epoxy composites. For this purpose, both materials were fabricated using the wet lay-up manufacturing technique under vacuum pressure. Both the glass/epoxy composites and the FML specimens were then subjected to isothermal aging (130°C, dried air) for up to 5 we...

agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. a mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. in each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...

Agricultural waste fibers have been found to be suitable as reinforcement in cement-based composites, but studies on oil palm fiber as reinforcement in gypsum-cement wall panels are scarce. A mixture of two equal weights of gypsum and cement, with water-binder ratios of 0.45 and 0.55 were prepared. In each mix a varying percentage of fiber contents of 2%, 3% and 4% by weight of the binders were...

Composites are becoming anessential part of today’s material because they offer advantagessuch as low weight, corrosion resistance, high fatigue strength; faster assembly etc. composites aregenerating curiosity and interest all over the worlds.The objective of this research is to provide the simulation methodology for natural fiber composites to predict the tensile strength using FEA tool: ANSY...