نتایج جستجو برای: engine performance

تعداد نتایج: 1106752  

2010
Matthieu Latapy Raphaël Fournier

Filtering or identifying paedophile queries is a key issue for law enforcement and search engines. However, these queries are in general mixed with a huge amount of other queries. Moreover, little is known on their characteristics. We address here these two issues in order to design the first tool for automatic detection of paedophile queries. Using domain expertise, we select some paedophile q...

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...

In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...

In this paper, the authors investigated the various factors, which can affect the performance of a turbofan engine. For this, the various subunits of a turbofan engine like inlet duct, compressor, combustion chamber, liner, turbine, exhaust nozzle etc. are investigated to find its various reliability characteristics through Markov process and supplementary variable technique (SVT). The main adv...

In this study, the effects of JP-4-biodiesel-diesel blends and engine operating parameters on the performance characteristics of a diesel engine were investigated. The experimental tests were performed on a four-cylinder DI diesel engine. The Mixture-RSM method was applied to develop the mathematical models based on the experimental data. The results showed that the fitted models could be prope...

In low ambient temperatures the engine will have poor output torque and power generation at the first cycles of its performance, long start time and huge noxious emissions because of insufficient temperature and quality of air-fuel mixture and failure of flame to burn the charge. It is noted that any attempt to increase the charge temperature leads to better combustion conditions. By applying t...

ژورنال: کنترل 2022

In this paper, first, using a test set on a turbocharged diesel engine in the engine test room, a nonlinear model is obtained and it is linearized around several operation points. Then, for the linear models, a linear quadratic integral Gaussian controller (LQIG) with variable parameters as function of engine speed is designed and simulated. In the proposed method, by controlling the wastegate,...

Journal: :international journal of energy and water resources 0
sengottaiyan k ic engines division, dept. of mech engg., ceg campus anna university, sardar patel road swaminathan m.r ic. engine division,dept.of mechanical engineering,anna university, chennai

oxides of nitrogen are the major emission from a diesel engine. it is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of no is promoted. various techniques are therefore employed to reduce the nox emission like egr, scr, etc. in this present work a rotating injector is a tec...

aIn the present study a 4-stroke 5hp diesel engine was tested with Diesel oil plus cottonseed oil blends. The blends in different proportions (10 to 50 percent by volume) were tested at constant speed of 1500 rpm. The said engine is operated at different loads and characteristics like Brake power, Brake thermal efficiency, specific fuel consumption etc. Engine performance for blends resulted in...

ژورنال: تحقیقات موتور 2010
محمدابراهیم, ابوالفضل, کاکایی, امیر حسین,

The objective of this work was to develop a new design of an intake manifold through a 1D simulation. It is quite familiar that a duly designed intake manifold is essential for the optimal performance of an internal combustion engine. Air flow inside the intake manifold is one of the important factors, which governs the engine performance and emissions. Hence the flow phenomenon inside the i...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید