Composite made of multiwalled carbon nanotubes coated with silver was fabricated by an electroless deposition process. The thickness of silver layer is about 40 to 60 nm, characterized as nano-crystalline with (111) crystal orientation along the nanotube's axial direction. The characterization of silver/carbon nanotube [Ag/CNT] nanowire has shown the large current carrying capability, and the e...

Nickel-Phosphorus (Ni-P) composite coatings were prepared on a poplar veneer surface via a simple electroless nickel (Ni) approach. The substrate deformation, flatness, crystalline structure, and wear resistance of the NiP composite coatings were investigated. The deformation degree of the substrate decreased as the number of deposition steps was increased. The flatness and wear resistance of t...

In this work the effects of various methods of agitation on the properties of electroless Ni-P-MoS2 composite coatings were investigated. Magnetic stirring as well as purging the solution with gas (Air, Oxygen, Nitrogen) were used. Plating rate, chemical composition, MoS2 distribution, and hardness of the deposit were measured. Topography of coating was studied with metallography and scanning e...

Ruthenium oxide±carbon composites with different loadings of RuO2 on carbon have been synthesized by an electroless deposition process. Increase in RuO2 loading results in increasing the speci®c capacitance of the composite electrode. The effect of temperature treatment on the performance of these materials has been studied in detail. Maximum capacitance was observed after heat treatment at 100...

A supported Pd-Au (Au 7wt%) membrane was produced by electroless plating deposition. Permeation tests were performed with pure gas (H₂, H₂, N₂, CO₂, CH₄) for long time operation. After around 400 h under testing, the composite Pd-Au membrane achieved steady state condition, with an H₂/N₂ ideal selectivity of around 500 at 420 °C and 50 kPa as transmembrane pressure, remaining stable up to 1100 ...

a palladium composite membrane was prepared by electroless plating on oxidized porous stainless steel support (ox-pss). hydrogen permeation flux through this composite membrane was measured in the temperature range of 574-674k and the pressure difference of two sides of membrane up to 90kpa. a simplified resistance model was employed to analyze the permeation behavior of hydrogen through pd/ox-...

A developmental composite scaffold for bone tissue engineering applications composed of hydroxyapatite (HA) and carboxymethylchitosan (CMC) was obtained using a coprecipitation method, which is based on the "autocatalytic" electroless deposition route. The results revealed that the pores of the scaffold were regular, interconnected, and possess a size in the range of 20-500 microm. Furthermore,...

Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young’s modulus as a function of temperature for electroless nickel is not readily av...

In this research work, Al 1wt% silver coated multi wall carbon nanotube (MWCNT) composite have been processed using powder metallurgy technique. In order to distribute CNT uniformly in the aluminum matrix high energy ball milling is required. . It was found that excessive milling can lead to carbide and alumina formation. So to reduce the milling time, the surface of CNT is modified by coating ...