The Direct Methanol Fuel Cell (DMFC) has attracted much attention due to its potential applications as a power source for transportation and portable electronic devices. Based on the advantages of the scaling laws, miniaturization promises higher efficiency and performance of power generating devices and the MicroDMFC is therefore an emergent technology. In this work, a set of experiments with ...

Carbon capsules with hollow core and mesoporous shell (HCMS) structures were used as a support material for Pt(50)-Ru(50) catalyst, and the catalytic performance of the HCMS supported catalyst in the direct methanol fuel cell was described; the HCMS carbon supported catalysts exhibited much higher specific activity for methanol oxidation than the commonly used E-TEK catalyst by about 80%, provi...

Pt-Pd catalyst supported on nitrogen-doped carbon nanofiber (N-CNF) was prepared and evaluated as a cathode electrode of the direct methanol fuel cell (DMFC). The N-CNF, which was directly synthesized by the catalytic chemical vapor deposition from acetonitrile at 640 °C, was verified as having a change of electrochemical surface properties such as oxygen reduction reaction (ORR) activities and...

A modified 3D numerical model on the energy conversion process in the anode side of a Direct Methanol Fuel Cell (DMFC) system was constructed and validated to published experimental results. Systematic simulations were performed to investigate the underlying mechanisms of the energy conversion process, and the combined effects of inlet flow rate and input methanol concentration were summarized ...

Thin-film electrodes for a low-power direct methanol fuel cell DMFC were prepared by incorporating carbon-supported Pt nanoparticles Pt/C into a silicon dioxide glass matrix. The SiO2 matrix was prepared via a sol-gel technique where tetraethyl orthosilicate TEOS was hydrolyzed by H2O in the presence of methanol. The Pt/C was stirred into the sol and the resulting mixture was applied to a glass...

This study presents a computational fluid dynamics (CFD) model for modelling gas evolution and current distribution in a direct methanol fuel cell (DMFC). The improved two-phase model includes a new sub-model for estimating the interface mass transfer without empirical correlations. Simulation results in a horizontal channel of the DMFC agree with typical trends reported in the literature for b...

Passive direct methanol fuel cells (DMFCs) are promising energy sources for portable electronic devices. Different from DMFCs with active fuel feeding systems, passive DMFCs with nearly stagnant fuel and air tend to bear comparatively less power densities. A steady state, one-dimensional, multi-component and thermal model is described and applied to simulate the operation of a passive direct me...

Pt-Ru supported on carbon nanotubes (CNTs) (single-walled nanotubes, double-walled nanotubes (DWNTs), and multi-walled nanotubes) catalysts are prepared by an ethylene glycol reduction method. Pt-Ru nanoparticles with a diameter of 2-3 nm and narrow particle size distributions are uniformly deposited onto the CNTs. A simple and fast filtration method followed by a hot-press film transfer is emp...

Direct methanol fuel cells (DMFCs) hold great promise for applications ranging from portable power for electronics to transportation. However, apart from the high costs, current Pt-based cathodes in DMFCs suffer significantly from performance loss due to severe methanol crossover from anode to cathode. The migrated methanol in cathodes tends to contaminate Pt active sites through yielding a mix...