Digital baseband predistortion (DPD) is a cost effective solution to improve the energetic efficiency of power amplifiers (PA) for wireless communication systems. This paper addresses the design of DPD in fix-point arithmetic, suitable for real-time implementation in a low-cost hardware such as a Field Programmable Gate Array (FPGA). The design starts in floating-point double-precision arithmet...

Orthogonal Frequency Division Multiplexing (OFDM) is considered as a strong candidate for future wireless communication because it is marked by its higher frequency multiplicity and greater immunity to multipath fading. However, the main drawback of OFDM is its high amplitude fluctuations measured by peak-to-average power ratio (PAPR), which leads to power inefficiency and requires expensive hi...

Digital predistortion (DPD) techniques are widely used to linearize of RF power amplifiers. In this article, a memory polynomial-based power has been modeled with memory order of 5 and nonlinearity order of 9. These specifications had been found suitable for advanced long-term evolution (LTE) wireless systems. A suitable DPD model was created based on the least square error minimization. Result...

Power amplifier (PA) linearization using digital pre-distortion (DPD) techniques is critical for designers transitioning 3G systems to 3.9G and 4G. This application note introduces the concept behind DPD, as well as how to use the Agilent W1716 SystemVue DPD builder to do hardware verification. This software module implements memory polynomial algorithms to correct wireless components that have...

The use of digital predistortion for linearizing a millimeter-wave power amplifier (PA) is investigated. A PA operating at 38 GHz is designed using an accurate non-quasi-static transistor model, taking into account both shortand long-term memory effects. A realistic test signal is then used for the identification of a nonlinear auto-regressive moving average (NARMA) behavioral model of the PA. ...

Efficient RF power amplifiers used in third generation systems require linearization in order to reduce adjacent channel inter-modulation distortion, without sacrificing efficiency. Digital baseband predistortion is a highly cost-effective way to linearize power amplifiers (PAs), but most existing architectures assume that the PA has a memoryless nonlinearity. For wider bandwidth applications s...

Optical orthogonal frequency-division multiplexing (OOFDM) signal is sensitive to nonlinear distortions induced by optical modulators. We propose and experimentally demonstrate a digital pre-distortion (DPD) algorithm to linearize the optical modulators including electro-absorption modulated lasers (EML) and Mach-Zehnder modulators (MZM) used in high-speed OOFDM transmitters. By using an adapti...

This paper proposes a robust combination of digital predistortion (DPD) and crest factor reduction (CFR) for radio frequency (RF) power amplifiers (PAs). It is constructed using the architecture of CFR-DPD connected with a compensation module (CM). The compensation module is introduced to achieve mutual compensation between the output signals of CFR and DPD, and this can reduce the damage to th...

4rthogonal frequency division multiplexing (OFDM) particularly suffers from the presence of nonlinearities since the signal amplitude is Rayleigh distributed. The degradation introduced by the nonlinear amplifier in the transmitter can be significantly reduced by using an analog cubic predistorter minimum mean square error (MMSE) predistorter proposed by the authors in [l].