Bending property of Ti-Ni alloy dental castings was evaluated in comparison with that of Co-Cr alloy in a cantilever test. Heat treatment effect on the bending property was also investigated in relation to phase transformation. Ti-50.85Ni (mol%) alloy was used, and the shape of bending test specimens was half-rounded in cross section, 2.0mm in diameter. The bending test was carried out at 310K....

Cytotoxicity is one of the most important problems in medical metal materials. Effect of different dental alloys on cytotoxic of L929 cells was evaluated by in vitro cytotoxicity-test (MTT method). Metal ion concentration was one of the factors leading to occurrence of cell toxicity. Thus metal ion concentration in cell culture fluid at different intervals of immersion periods were detected by ...

Abstract:In recent years, there have been many attempts to improve the properties of dental amalgam. The aim of the present investigation was fabrication and characterization of dental amalgams containing TiO2 nanoparticles and evaluation of their compressive strength, antibacterial and corrosion behavior. In this experimental research, TiO2 nanoparticles (TiO2 NPs) were added to reference amal...

introduction: failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. this study was undertaken to evaluate the effect of nd:yag laser treatment on the bond strength of porcelain fused to metal. methods:  twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

In this study, the corrosion resistance of Ag-Au-Cu-Pd system alloys consisting of 5 or 10 mass% indium was evaluated. Levels of element release and tarnish were determined and electrochemical measurements performed. Results were compared with those for commercial silver-palladium-gold alloy. In terms of electrochemical behavior, the transpassive potential of these experimental alloys was 168-2...

STATEMENT OF PROBLEM Dental alloys have different mechanical properties compared with enamel. However, few studies have been conducted to determine the effects of the retention forces of clasps when applied on different cast crowns. PURPOSE The purpose of this study was to evaluate the retention forces of cast circumferential clasps made of cobalt-chromium alloy on complete cast crowns made o...

s The purpose of this study was carried out by the embryotoxicity risk assessment of the dental alloys containing indium. We produced Ag-In alloy, Ag-Pd-Au-Cu alloy and gold alloy for porcelain bonding. For the extraction of these alloy components into the ES-D3 cell culture medium, each alloy was reduced to a powder using a diamond point and sterilized after rinsing. In order to facilitate the...

background and aim: an important criterion for success assessment of implant-supported prostheses is marginal fit. vertical and horizontal discrepancy can result in loosening of the prosthetic screw, crestal bone resorption, peri-implantitis and loss of osseointegration. despite careful attention to waxing, investing, and casting, marginal discrepancies are inevitable. the aim of this study was...