نتایج جستجو برای: deformation mechanism
تعداد نتایج: 632068 فیلتر نتایج به سال:
The present study investigates the crystal preferred orientation (CPO) of quartz crystals in psammitic rocks to ascertain the deformationmechanism using electron backscatter diffraction (EBSD) on quartz crystals from north of the Renvyle-Bofin Slide (RBS) nearLetterfrack in western Ireland. Complete crystallographic orientations were determined for several thousand individual quartz crystalsin ...
the built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. the built up layer (bul) is formed in second deformation zone near the tool-chip interface in the back of the chip. this parameter influences the tool life and machined surface quality. this bul should not be confused with the built up edge (bue). the deformation of the bul in...
The hot deformation behavior of a typical martensitic stainless steel containing 2.1% Ni was investigated by means of the compression test in the strain rate range of 0.001-1 s-1 and temperature range of 950-1150 °C. The flow behavior of the steel was evaluated using the flow stress curves and flow softening map and by microstructural investigation. Taking into account of the strain effect on t...
Two effective quasi – static models are presented to consider pre and post- failure behaviors of the clamped circular plates subjected impulsive loads based on upper bound limit analyses of deformation. In first model, it is assumed that final profile is considered to have a conical shape, which is represented by radial and vertical motions of a single peripheral plastic hinge permanent deflect...
Laboratory hot torsion testing technique was carried out on one plain low carbon steel and two plain low carbon Nb and Nb-Ti micro alloyed steels to study the effects of chemical composition, micro alloying addition, on the dynamic softening and grain refinement of ferrite during warm deformation. Deformation schedule was conducted within two phase region (i.e. between Ar3-Ar1). The physical pr...
the aim of this study is to investigate the nucleation of new grains by necklacing mechanism during dynamic recrystallization (drx). the material used is 316 stainless steel. in order to modeling the deformation behavior during hot rolling, one-hit compression tests were performed at temperature range of 950-1100 °c with strain rates of 0.01-1s-1. the result shows that at the temperature of 100...
the effect of interstitial atoms upon portevin _ le chate1ier phenomena, are theoretically and experimentally investigated as a manifestation of the cottrell effect. in presence of substitutional atoms, because of their very smaller diffusion coefficient, the condition is more complicated. in this article the behaviour of substituflonal atoms in the beryllium and a few fe alloys, on portevin-le...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید