Introduction For dose measurement in Megavoltage (MV) photon beams with ion chambers, the effect of volume occupied by the air cavity is not negligible. Therefore, the result of measurement should be corrected with a displacement perturbation correction factor (Pdis) or using an effective point of measurement (EPOM). The aim of this study is to calculate the EPOM for cylindrical ion chamber and...

This paper presents the design and modeling of a flexible tactile sensor, capable of detecting the 2D surface texture image, contact-force estimation and stiffness of the sensed object. The sensor is made of polymer materials. It consists of a cylindrical chamber for pneumatic actuation and a membrane with a mesa structure. The inner radius of the cylindrical chamber is 2cm and its outer radius...

Youxue Zhang Department of Geological Sciences, University of Michigan, Ann Arbor, MI 48109–1063, USA Fax: c1(734) 763 4690 e-mail: [email protected] Abstract Simulated gas-driven eruptions using CO2–water-polymer systems are reported. Eruptions are initiated by rapidly decompressing CO2–saturated water containing up to 1.0 wt.% CO2. Both cylindrical test cells and a flask test cell were used to...

Background: The aim of this work was to study the output factors for Linac using different ionization chambers and build up caps. Materials and Methods: Output factors were measured for open square fields (3 × 3 cm to 40 × 40 cm) defined by collimator jaws for 6 and 15 MV photon beams from a Varian Clinac 2100C accelerator were measured. The measurements in air were performed using Com...

In this paper, the effect of cold air on the fluid flow inside the cylindrical combustion chamber and its wall temperature distribution have been studied computationally, taking into account the effect of radiative heat transfer from hot gases. The results have been compared with the case that radiative heat transfer was neglected. It is observed that the reattachment length increases when incr...

Purpose: Fiber carbon is the most common material used in treating couch as it causes less beam attenuation than other materials. Beam attenuation replaces build-up region, reduces skin-sparing effect and causes target volume under dosage. In this study, we aimed to evaluate beam attenuation and variation of build-up region in 550 TxT radiotherapy couch.Materials and Methods: In this study, we ...

Measurements have been conducted in an anechoic chamber for comparison to current linear acoustic theory for radiation directivity from a cylindrical pipe with toneholes. Time-delay spectrometry using an exponentially swept sine signal was employed to determine impulse responses at points external to the experimental air column. This technique is effective in clearly isolating nonlinear artifac...