In this paper, ratcheting behavior of beams subjected to mechanical cyclic loads at elevated temperature, using the rate dependent Chaboche unified viscoplastic model with combined kinematic and isotropic hardening theory of plasticity, is investigated. A precise and general numerical scheme, using the incremental method of solution, is developed to obtain the cyclic inelastic creep and plastic...

Comprehensive field investigations into the axial cyclic loading behaviour of open-steel pipe piles driven and aged in low-to-medium density chalk identify conditions under which is stable, unstable or metastable. Post-cycling monotonic tests confirmed that stable cycling enhanced pile capacity marginally, while cases suffered potentially large losses shaft capacity. Metastable led to intermedi...

During earthquake excitations, reinforced concrete bridge columns can be subjected to a combination of axial load, shear force, flexural moments, and torsional moments. The torsional moment can be much more significant in columns of bridges that are skewed, curved, have unequal spans, or unequal column heights. Combined loading including torsion can result in complex flexural and shear failure ...

The phenomenon of ratchetting is defined as constant accumulation of plastic strain or deformation under combined steady state and cyclic loading. It can reduce the fatigue life or can cause failure of piping components or systems subjected to seismic or other cyclic loads. The uniaxial ratchetting characteristics of SA333 Gr.6 steel have been investigated at room temperature in the present pap...

Considering economical reasons and attempting to reduce carbon foot print of concrete structures, there is increasing tendency toward use of high strength reinforcement in seismically active regions. ACI 318-19, Iranian steel rebars standard INSO 3132 and next edition of Iranian national building allow the use of high strength rebars in elements of ductile force resisting systems. Therefore it ...

A finite element scheme for simulation of welding residual stresses is presented in this paper. Detailed thermal and residual stress analyses for butt-welded and socket-welded pipes are performed using ANSYS and ABAQUS. The calculated distribution of axial stress and hoop stress at welded joint are validated against experimental results. Furthermore, residual stress relaxation under high amplit...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

By taking the axial tension member as an example, the damage caused by the cyclic stress influencing reliability was researched. According to the damage mechanics theory, some micro-cracks were observed in the material with cyclic load. With the increase of times loads inflicting, the fresh micro-cracks were formed; meanwhile, the existing cracks further extended, consequently, the effective be...

carbonate materials are mostly found in tropical areas, where exploiting gas and oil resources are of high concern. their unique behavior under shear loading first was recognised during oil resources investigations in the persian gulf. off-shore structures have been placed on carbonate soils which are highly crushable.during storms cyclic loading imposes on the bases of structures lied down on ...