For obtaining reservoir petrophysical properties, for example porosity, non-destructive methods such as X-ray computed tomography, CT, seems to be precise and accurate. Porosity is deducted from the CT image with a single scan via different techniques, such as pore space detection by image segmentation techniques then correlation with porosity. More than one hundred samples with carbonate li...

for obtaining reservoir petrophysical properties, for example porosity, non-destructive methods such as x-ray computed tomography, ct, seems to be precise and accurate. porosity is deducted from the ct image with a single scan via different techniques, such as pore space detection by image segmentation techniques then correlation with porosity. more than one hundred samples with carbonate litho...

There are considerable rates of pediatrics trauma referring emergency department following a traumatic event. The worried parents are requesting for the most sensitive diagnostic test, so emergency physicians ask them to underwent brain computed tomography (CT) scan. Lower threshold of decision making regarding use of brain CT scan results in huge number of normal imaging. On the other hand, ra...

Background: With the introduction of computed tomography in diagnostic radiology a new and fundamentally different imaging modality has become available. Meanwhile, it is clear that the absorbed doses by the patients during CT were relatively high in comparison with those of other diagnostic radiology techniques. The aim of this survey was to determine the average absorbed dose in Yazd provin...

Introduction: One of the main steps in the optimization process in diagnostic imaging is the quality control of radiology devices. The usual method of CT scan calibration is used of a phantom. The phantom created a certain weakening for the radiation through which it passes. One of the most suitable methods for quantitative analysis of the resolution and contrast in CT scan im...

background and aims. the imaging techniques commonly used for foreign body detection include plain radiography, xeroradiography, computed tomography (ct) scans, magnetic resonance imaging (mri) and ultrasonography. the aim of the present study was to compare cone-beam computed tomography (cbct) with conventional ct scan in determination of the exact location of a foreign body in the maxillofaci...

the c7-ras 6/061-004 training course by the international atomic energy agency/regional cooperative agreement (iaea/rca) was held in chiba in 2014. the syllabus, pre- and post-course evaluations, and survey questionnaire results were assembled in this course. the post-course evaluation, including 32 questions similar to the pre-course evaluation, was performed right after the end of the final e...

The purpose of this study was to investigate quantitatively by measurement and modeling the variations in CT number distributions of mobile targets in cone-beam CT (CBCT) imaging. CBCT images were acquired for three targets manufactured from homogenous water-equivalent gel that was inserted into a commercial mobile thorax phantom. The phantom moved with a controlled cyclic motion in one-dimensi...

Introduction: In 2000, the UNSCEAR reported that CT constitutes 5% of all the medical x-ray  examinations and it contributes 34% of the resultant collective dose worldwide. Children are more  sensitive to the ionizing radiations than adults. So, routine quality control tests are expected to be  carried out periodically on the CT scanners. The aim of this research was to estimate the effective  ...