Impact testing methodology is findings the applications for determining the impact strength of the different materials. Oneof the most important characteristics of structural steels, toughness is assessed by the Charpy V-notch impact test. The objective of the research was to maximize the impact toughness by selecting various combinations of Charpy Impact test parameters. In this paper, experim...

Ammonia adsorption on single-walled carbon nanotubes (SWNTs) was studied by means of infrared spectroscopy at both cryogenic (approximately 94 K) and room (approximately 300 K) temperatures. At 94 K, vacuum-annealed SWNTs showed no detectable ammonia uptake. However, the ammonia adsorption was found to be sensitive to the functionalities and defects on the nanotube surfaces. NH3 adsorption was ...

biological removal of lead was observed in this study during treatment of synthetic solutions of this heavy metal by a sample of waste activated sludge (was) having mlss concentration of 10000 mg/l. the objective was determining the capability of was in removal of lead in three different conditions of treatment: without any aeration and feeding, by simultaneous aeration and feeding and by aerat...

The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focu...

Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...

We have been developing low power cryogenic readout electronics for space borne large format far-infrared image sensors. As the circuit elements, a fully-depleted-silicon-on-insulator (FD-SOI) CMOS process was adopted because they keep good static performance even at 4.2 K where where various anomalous behaviors are seen for other types of CMOS transistors. We have designed and fabricated sever...

17-4ph stainless steel is a martensitic precipitation hardening stainless steel that provides an outstandingcombination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. this valuable alloy is widely used in the aerospace, nuclear, chemical, petr...

In this paper effect of cryogenic treatment on mechanical properties of cold work tool steels at various combination of heat treatment cycle (process sequence) are studied. The material selected for these processes are AISI D2 and D3.Cryogenic treatment is commonly referred as cryotreatment, is an add-on process to the conventional heat treatment of tool steel. Cryogenic treatment improves hard...