Devices in modern technologies often have complex architectures, dissimilar materials, and small features. Their long-term reliability relates to inelastic, time-dependent mechanical behavior of such structures. This paper analyzes a three-layer structure consisting of, from top to bottom, an elastic film, a power-law creep underlayer, and a rigid substrate. The layers are bonded. Initially, th...

Crack is one of the most typical damage types in engineering structures, and therefore is a research focus in the field of structural health monitoring (SHM). The monitoring and evaluation methods for crack-type damage are studied using a Lamb wave-based RAPID algorithm (Reconstruction Algorithm for the Probabilistic Inspection of Damage) in this study, which is based on a correlation analysis....

Fretting fatigue experiments and finite element analysis were carried out to investigate the influence of cylindrical-on-flat contact on crack nucleation, crack path and fatigue life of medium-carbon steel. The location of crack nucleation was predicted using the maximum shear stress range criterion and the maximum relative slip amplitude criterion. The prediction using the maximum relative sli...

In this paper, the problem of calculating the stress intensity factor (SIF) for an orthotropic thick-walled cylinder with a small radial crack subject to internal pressure is considered. The crack is assumed to be an edge crack on the external radius of the cylinder. The stress intensity factor is calculated by superposition of an uncracked cylinder with uniform stress distribution and a cylind...

In this paper the line-spring model developed by Rice and Levy is used to obtain an approximate solution for a cylindrical shell containing a part-through surface crack. It is assumed that the shell contains a circumferential or axial semi-elliptic internal or external surface crack and is subjected to a uniform membrane loading or a uniform bending moment away from the crack region. To formula...

The results of a numerical study of the nonlinear response of thin unstiffened aluminum cylindrical shells with a longitudinal crack are presented. The shells are analyzed with a nonlinear shell analysis code that accurately accounts for global and structural response phenomena. The effects of initial crack length on the prebuckling, buckling and postbuckling responses of a typical shell subjec...

Abstract A simple method is proposed to model the open cracked beam structures. In this method, crack is modeled as a beam element. Hence cracked beam can be assumed to be a beam with stepped cross sections, and problem of determining natural frequency and mode shape of cracked beam, can be solved as determining these characteristics for a beam with different length and cross section. With this...

This paper was to verify the STAGS (general shell, geometric and material nonlinear) code and the critical crack-tip-opening angle (CTOA) fracture criterion for predicting stable tearing in cracked panels that fail with severe out-of-plane buckling. Materials considered ranged from brittle to ductile behavior. Test data used in this study are reported elsewhere. The STAGS code was used to model...

nowadays, textile and woven fabric composites are taken into consideration forapplications in high mechanical properties and every in-plane direction. however, developments inmodelling and characterisation of the fabric reinforced composite materials are considered more inthe effects of element types used in the mesh generation of the crack tip. the type of elementselected for the crack tip, a ...

In flip-chip package, the mismatch of thermal expansion coefficients between the silicon die and packaging substrate induces concentrated stress field around the edges and corners of silicon die during assembly, testing and services. The concentrated stresses result in delamination on many interfaces on several levels of structures, in various length scales from tens of nanometers to hundreds o...