SILAR deposited copper tin sulfide (Cu2SnS3) thin films were used to analyze the study of electrochemical impedance, capacitancevoltage characteristics and currentvoltage characteristics. The photoconversion efficiency of SILAR deposited CTS thin film-based photoelectrochemical cell elucidate with the help of capacitance-Voltage (C-V) Characteristics study by MottSchottky plot and corresponding...

thin film phthalocyanines(pc), incloding zinc, iron, and magnesium phthalocyani-nes, were prepared by vacuum deposition method. chronocoulometry was used to study the charge transfer reaction mechanism of ionic species through the thin films. the results obtained in chronocoulometric studies shows that the thin film phthalocyanines could operate via two mechanisms.the first mechanism metal pc t...

In this work, the evolution of microstructure and the thermo-mechanical behavior of co pper and dilute copper alloy thin films was investigated. 0.3 to 2.0 μm thick film s were deposited by magnetron sputtering under ultra high vacuum conditions onto diffusion-barrier coated silicon substrates and subjected to wafer curvature measurements. Pure copper films annealed in ultra high vacuum exhibit...

Copper chalcopyrite is a promising candidate for a photocathode material for photoelectrochemical (PEC) water splitting because of its high half-cell solar-to-hydrogen conversion efficiency (HC-STH), relatively simple and low-cost preparation process, and chemical stability. This paper reviews recent advances in copper chalcopyrite photocathodes. The PEC properties of copper chalcopyrite photoc...

Monoshaped and monosized copper nanostructured particles have been prepared by potentiostatic electrochemical deposition on an ultrathin polypyrrole (PPY) film, electrochemically grown on a Si(100) substrate sputter-coated with a thin gold film or gold-film electrode (GFE). The crystal size and the number density of the copper nanocrystals have been examined by varying several deposition parame...

The metal-support interactions for a model silica-supported copper catalyst have been studied using temperature-programmed desorption, X-ray photoelectron and infrared reflection-absorption spectroscopies under ultrahigh vacuum conditions. The model catalyst support was prepared by synthesizing a thin SiO, film (_ 100 A) on a Mo(l10) surface. Copper was then evaporated onto the SiO, films. A sm...

The influence of Cu, Ag, and Au additives on the L10 ordering, texture, and grain size of FePt thin films has been examined. Lattice parameter data indicated that Au and Ag additives tended to segregate from FePt, but Cu alloyed with FePt. FePt films with Au or Ag additive showed 1–2 kOe higher coercivity values compared to a pure FePt film after annealing at 450 °C and above for 10 min. The ad...

We report a high-performance amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) thin-film transistor (TFT) with new copper-chromium (Cu-Cr) alloy source/drain electrodes. The TFT shows a high mobility of 39.4 cm 2 ·V - 1 ·s - 1 a turn-on voltage of -0.8 V and a low subthreshold swing of 0.47 V/decade. Cu diffusion is suppressed because pre-annealing can protect a-IGZO from damage during the electrode...

mn doped zno nanocomposite thin film coated on glass by a simple spin-coating method was used to degrade an azo textile dye from aqueous environment. mn doped zno nanocomposite thin film was characterized by means of x-ray diffraction (xrd) and scanning electron microscopy (sem). the photo-reduction activity of photocatalyst was evaluated using an azo textile dye as organic contaminant irradiat...

Highly textured undoped (pure) and Al doped ZnO nanocrystalline thin films prepared by ultrasonic atomization and pyrolysis method are reported in this paper. ZnCl2 water solution was converted into fine mist by ultrasonic atomizer (Gapusol 9001 RBI Meylan, France). The mist was pyrolyzed on the glass substrates in horizontal quartz reactor placed in furnace. The Structural and microstructural ...