In most cases, structural engineers assume a concrete floor to be a rigid diaphragm. Although this simplification is in most cases acceptable, it should be noted that such an assumption may be distrusted due to certain problems. Concrete structures with staggered shear walls are among those whose analysis should be conducted with special concern for the behavior of their floor diaphragms. Howev...

The main objective of this study is to evaluate the workability of fresh portland cement concrete while it is still in the mixing truck by determining fundamental rheological parameters (plastic viscosity and yield stress). Nine concrete mixtures with different values of yield stress and plastic viscosity were tested in a concrete truck. The measurements made with the truck were based on the ty...

(RCS) frames which are systems that dwell of concrete columns and steel beams , by optimizing the act of compressive strength of concrete and bending strength of steel due to not only a decrease in building weight in comparison to concrete structures but also having a better action in long spans frames . In this paper for analysis RCS behavior, a category of nonlinear Push Over analyses were ...

in practice, foundations are settled on the soft layers of soil, so the ground must be designed as well as the structure. wave propagation and hysteresis damping of soil layers may alter the seismic response of flexible-base design in comparison to controversial fixed-base. lots of uncertainties about this issue, necessitate most of seismic design standards including iranian standard no. 2800 t...

steel corrosion of bars in concrete structures is a complex process which leads to the reduction of the cross-section bars and decreasing the resistance of the concrete and steel materials. in this study, reliability analysis of a reinforced concrete beam with corrosion defects under the distributed load was investigated using the enhanced hasofer-lind and rackwitz-fiessler (ehl-rf) method base...

By increasing the demolition of old concrete structures and the interest of civil industries to consume cheaper materials, using Recycled Concrete Aggregate (RCA) can cause environmental protection and decrease the construction costs. On the other hand, the high potential of Recycled Aggregate Concrete (RAC) in concrete industry was established by extensive experimental researches were performe...

Steel corrosion of bars in concrete structures is a complex process which leads to the reduction of the cross-section bars and decreasing the resistance of the concrete and steel materials. In this study, reliability analysis of a reinforced concrete beam with corrosion defects under the distributed load was investigated using the enhanced Hasofer-Lind and Rackwitz-Fiessler (EHL-RF) method base...

This paper provides an incremental layerwise finite element formulation for the viscoelastic analysis of multilayered pavements.  The constitutive behavior of asphalt concrete is represented by the Prony series. Layerwise finite element has been shown to provide an efficient and accurate tool for the numerical simulation of laminated structures. Most of the previous research on numerical simula...

Reinforced concrete structures consists of two main components and the behavior of these structures influenced by gender and material properties, in order to investigate the behavior of concrete reinforced beam that most important flexural element in reinforced concrete structures, we chosen High Strength Concrete (HSC) for concrete and GFRP and steel bars for reinforcement. For compare the new...

    Freezing and thawing resulting from the ingression of water into concrete causes cracking or spalling. Corrosive ions such as chloride or sulfate penetrate the concrete surface and eventually reach the reinforcing steel. This causes the steel to corrode.     Because of the high maintenance and replacement costs, responsible officials should be increasingly concerned about the growing number...