نتایج جستجو برای: concrete resistance
تعداد نتایج: 448216 فیلتر نتایج به سال:
This investigation was performed to establish the effects of the source and amount of fly ash on abrasion resistance of concrete. A reference concrete was proportioned to have a 28day age strength of 41 MPa. Three sources of Class C fly ash were used in this research. From each source, three levels of fly ash to total cementitious materials content (40, 50, and 60%) were used in producing the c...
Two series, each consisting of seven high-volume fly ash concrete mixtures with conductive carbon fibers, were used in this investigation. The first series of the concrete mixtures contained ASTM Class C fly ash and 0, 1, 3, 5, 7.5, 10, and 20 lbs. carbon fibers per cubic yard of concrete. The second series of concrete mixtures contained high-carbon fly ash in addition to the materials used in ...
in this research, 210 concrete cube specimens (15cm) were made replacing 0, 5, 10, 15, 20, 25, 30, 35, 40, 50, and 60 percent of slag powder from isfahan steel mill for cement. the control specimens were made with 350 kg/m3 cement content and the water cement ratio in all specimens was 0.51. the slump value and compressive strength of concrete specimens in 7, 28 and 90 days were obtained and th...
The opinions, findings, and conclusions expressed in this publication are those of the principal investigators and the Missouri Department of Transportation. They are not necessarily those of the U.S. Department of Transportation, Federal Highway Administration. This report does not constitute a standard or regulation. ii ABSTRACT The main objective of this study was to determine the effect on ...
an experimental program was carried out to investigate the behavior of steel, fiber reinforced concrete (sfrc) under abrasion and cycles of freeze and them. compression and flexural tests were also performed in order to reach a comprehensive conclusion of the response. in total, over 200 specimens were tested the test variables included two concrete strength., (i. e., 28 mpa as normal strength ...
The chloride penetration resistance of phosphoaluminate cement (PAC) concrete was investigated in this study. The effects of mixture proportioning parameters, including cement content, water–cement ratio (w/c), and superplasticizer content on chloride ion penetration resistance of PAC concrete were investigated by the rapid chloride migration test (RCM). The result shows that the increase of ce...
in this paper a new method based on strut-and-tie model (stm) is proposed to determine the shear capacity of simply supported rc deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. it is assumed that, the total carried shear force by rc deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism ...
one of the most commonly used techniques to reduce the corrosion rate of rebar in concrete is addition substances named corrosion inhibitors into the concrete. corrosion inhibitor is chemical compounds that were added to concrete to prevent corrosion of steel in concrete. sodium nitrate is a type of anodic inhibitors that this study investigatesthe effect of this inhibitor on the properties of ...
This paper presents a study on the behavior of concrete produced from multi-component blended cements. These blends were prepared by blending 20 percent to 60 percent ASTM Type I cement with the combination of Class C fly ash and clean coal ash. Two percent to four percent sodium sulfate anhydrite was added to the blends as a chemical activator. Tests were conducted on the prepared concrete for...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید