A novel nanowire-structured polypyrrole-cobalt composite, PPy-CTAB-Co, is successfully synthesized with a surfactant of cetyltrimethylammounium bromide (CTAB). As an electro-catalyst towards oxygen reduction reaction (ORR) in alkaline media, this PPy-CTAB-Co demonstrates a superior ORR performance when compared to that of granular PPy-Co catalyst and also a much better durability than the comme...

Thin catalyst films with electrocatalytic water oxidation properties similar to those of a recently reported Co-based catalyst can be electrodeposited from dilute Ni(2+) solutions in borate electrolyte at pH 9.2 (B(i)). The Ni-B(i) films can be prepared with precise thickness control and operate at modest overpotential providing an alternative to the Co catalyst for applications in solar energy...

Here, metal nanoparticles were synthesized by chemical reduction of the corresponding metal salts in the presence of chitosan polymer. Binary and ternary metallic-chitosan Pt-Fe-CH, Pt-Co-CH and Pt-Fe-Co-CH nanocomposites were prepared. Transmission electron microscopy images and UV–Vis spectra of the nanocomposites confirmed the presence of the metal nanoparticles. The electrocatalytic activit...

Modification of conventional Pt/C electrocatalyst with silicomolybdic acid (SiMoA) was performed using electrochemical cyclic voltammetry method. The modified and unmodified catalysts were tested under identical conditions for electrooxidation of CO, methanol, and ethanol. In the CO-stripping experiments, the modified catalyst was characterized by significant shifts (80 and 60 mV) to lower onse...

A novel generic method of silica supported catalyst system generation from a fluid state is presented. The technique is based on the combined flow and radiation (such as microwave, thermal or UV) induced co-assembly of the support and catalyst precursors forming nano-reactors, followed by catalyst precursor decomposition. The transformation from the precursor to supported catalyst oxide state c...

an extensive study of higher alcohol synthesis (has) from synthesis gas using cobalt (co) promoted alkalized mos2 catalysts supported on carbon nanotubes (cnts) is reported. up to  5wt.% of co is added to the 15wt.% mo-wt.%k/ cnts by incipient wetness impregnation method. most of the metal particles were homogeneously distributed inside the tubes and the rest on the outer surface of the cnts. t...

This paper presents the synthesis and characterization of monometallic and bimetallic cobalt and iron nanoparticles supported on alumina. The catalysts were prepared by a wet impregnation method. Samples were characterized using temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), CO-chemisorption, transmission electron microscopy (TEM), field emission scanning electr...

Commercialization of proton exchange membrane fuel cells (PEMFCs) requires less expensive catalysts and higher operating voltage. Substantial anodic overvoltage with the usage of reformed hydrogen fuel can be minimized by using CO-tolerant anode catalysts. Carbon-supported Pt–BeO is manufactured so that Pt particles with an average diameter of 4 nm are distributed on a carbon support. XPS analy...

The catalyst containing 80%Co/20%Ce/15wt%SiO2 was prepared using fusion procedure and studied for the conversion of synthesis gas to light olefins. The effect of a range of operating variables such as the pressure, temperature and H2/CO molar feed ratio on the catalytic performance of fused catalyst was investigated. It was found that the best operating conditions are H2/CO=2/1, T=350 ̊C and P=2...

New supramolecular photocatalysts comprising an asymmetric bis-tridentate Ru(ii) complex that functions as a photosensitizer and a Ru(ii) carbonyl complex as the catalyst were designed. The complexes photocatalyzed the reduction of CO2 to CO or formic acid with high selectivity. The product distribution depended on the catalyst unit. CO and formic acid were the main products when using [Ru(BL)(...