نتایج جستجو برای: circular convergent nozzle
تعداد نتایج: 96478 فیلتر نتایج به سال:
In this paper we prove existence, uniqueness and regularity of certain perturbed (subsonic–supersonic) transonic potential flows in a two-dimensional Riemannian manifold with “convergent–divergent” metric, which is an approximate model of the de Laval nozzle in aerodynamics. The result indicates that transonic flows obtained by quasi-one-dimensional flow model in fluid dynamics are stable with ...
A major challenge in high-resolution x-ray free-electron laser-based coherent diffractive imaging is the development of aerosol injectors that can efficiently deliver particles to the peak intensity of the focused X-ray beam. Here, we consider the use of a simple convergent-orifice nozzle for producing tightly focused beams of particles. Through optical imaging we show that 0.5 μm particles can...
Experimental investigation to study the heat transfer between a vertical round alumina-water nanofluid jet and a horizontal circular round surface is carried out. Different jet flow rates, jet nozzle diameters, various circular disk diameters and three nanoparticles concentrations (0, 6.6 and 10%, respectively) are used. The experimental results indicate that using nanofluid as a heat transfer ...
A three-Dimensional computational model is used to simulate flow in a non-axisymmetric, convergent-divergent nozzle incorporating porous cavities for shockboundary layer interaction control. The nozzle has an expansion ratio (exit area/throat area) of 1.797 and a design nozzle pressure ratio of 8.78. Flow fields for the baseline nozzle (no porosity) and for the nozzle with porous surfaces of 10...
One possible method of reducing jet noise at takeoff is the use of an ejector in which the propelling nozzle discharges into a shroud and thereby induces a secondary flow. The present report describes an experiment on the aerodynamics of such systems. The primary nozzle was axisymmetric and convergent and the shrouds were cylindrical with faired convergent entries. The stagnation temperatures o...
This article focuses on the flow development and static wall pressure distribution along circular duct from convergent-divergent (CD) nozzle. The study aims to examine quality of stream in conduit when control is employed. microjets are activated at base (PCD) 13 mm, diameter 1 mm. Mach numbers investigation 1.3, 1.9, 2.4. length considered was L = 10D 1D. enlarged tube 16 experiments were cond...
The powder-blasting method is used to fabricate structures with a three-dimensional topography in glass using elastomeric masks. The relation between the mask opening width and the erosion depth is exploited to fabricate microstructures with varying depth in a single micropatterning step. As an application, planar three-dimensional micro-mixers were fabricated, which consist of a repeating conv...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید