Mechanical integrity of the interfacial region between ceramic coatings and substrates is critical to high performance coated mechanical components and manufacturing tools. Mechanical failure of the coating/substrate interfacial region often leads to catastrophic failure of the coated system as a whole. Despite extensive research over the past two decades, quantitative assessment of the mechani...

This work presents a novel coating technique to manufacture ceramic superhydrophobic coatings rapidly and economically. A rare earth oxide (REO) was selected as the coating material due to its hydrophobic nature, chemical inertness, high temperature stability, and good mechanical properties, and deposited on stainless steel substrates by solution precursor plasma spray (SPPS). The effects of va...

Macor coatings on 316 alloys substrates were prepared by plasma spraying. The crystallization temperature, thermal expansion coefficient of mica glass-ceramic were at 900ºC and 40× 10−7/◦C respectively. The microhardness of obtained glass-ceramic coating was 6.8GPa and the coefficient friction was 0.98 . 

Sol-gel processing is an attractive method for large-scale surface coating due to its facile and inexpensive preparation, even with the inclusion of precision nanotopographies. These are desirable traits for metal orthopaedic prostheses where ceramic coatings are known to be osteoinductive and the effects may be amplified through nanotexturing. However there are a few concerns associated with t...

Calcium phosphate (CaP) ceramic coatings have been used to enhance the biocompatibility and osteoconductive properties of metallic implants. The chemical composition of these ceramic coatings is an important parameter, which can influence the final bone performance of the implant. In this study, the effect of phase composition of CaP-sputtered coatings was investigated on in vitro dissolution b...

Atmospheric plasma spraying (APS) is a well established process for preparing ceramic coatings. In this process, powder particles injected into the plasma jet are heated and accelerated simultaneously in the plasma stream and are deposited in molten or semi-molten droplets conditions onto a prepared substrate. During droplet impingement, these molten droplets rapidly solidify to form single spl...

Adhesion failure and/or detachment of ceramic tiling are common building defects. Bonding rupture of this type of coating presents a serious risk to people’s safety, in particular if it occurs on external façades. It may be avoided by earlier non-destructive inspections. This paper presents the results of an active thermography investigation in which adhesive bonding defects of ceramic coatings...

O This in vitro treatments, 3 luting agents and thermocycling on microtensile bond strength (μTBS) to zirconia ceramic. Material and Methods: A total of 18 blocks (5x5x4 mm) were fabricated from zirconia ceramic (ICE Zirkonia) and duplicated into composite blocks (Alphadent). Ceramic blocks were divided into 3 groups (n=6) according to the following surface treatments: airborne-particle abrasio...

This paper reviews the potential of polymer and ceramic matrix composites for aerospace/space vehicle applications. Special, unique and multifunctional properties arising due to the dispersion of nanoparticles in ceramic and metal matrix are briefly discussed followed by a classification of resulting aerospace applications. The paper presents polymer matrix composites comprising majority of aer...