Purpose: The purpose of the current study was to examine the effect of accelerated aging on color stability of the In-Ceram and Cergogold ceramic materials. Materials and Methods: Ceramic samples with 1.0 mm in diameter and 1.5 mm in thickness were prepared in three commonly used shades. CIE Lab readings were recorded with a spectrophotometer prior to experiments and after 100-hour accelerated ...

UNLABELLED To evaluate bond strengths of different resin cements to two aluminum oxide-based ceramics. METHODS One hundred ten ceramic cylinders were produced and given four different surface treatments. Resin cement cylinders were then bonded to the ceramic cylinders using different resin cements and the bond strength was determined by shear testing to the breaking point. We were thus able t...

This study evaluated the effects of distinct surface treatments on the micro-tensile bonding strength (microTBS) of different ceramic materials. The occlusal surfaces of eighteen human maxillary molars were flattened perpendicularly to the long axis and divided in groups based on surface treatment (sandblasting: s; hydrofluoric acid: a; tribochemical silica coating: t): DP-s, DP-a, DP-t, IE-s, ...

PURPOSE This study examined the influence of ceramic coping thickness on the maximum stresses that arise in a first premolar all-ceramic crown. MATERIALS AND METHODS Axisymmetric finite element models with different In-Ceram Alumina coping thicknesses (0.3, 0.6, and 0.9 mm) were examined. Models with and without resin lute were constructed. To all models, an identical axial load of 600 N was ...

OBJECTIVE To evaluate the effects of strain rate and temperature on the mechanical properties of resin composite restorative materials (RCs) and to investigate the construction of temperature--strain rate equivalence 'master curves'. METHODS Four visible light-cured resin composite RCs, all of shade A3, were used: Heliomolar Radiopaque (HR) and Tetric Ceram (TC) (Ivoclar, Schaan, Liechtenstei...

This study was conducted to evaluate the compressive strength, compressive fatigue limit and the amount of fluoride released from the Smart Dentin Replacement SDR TM restorative material in comparison to another fluoride released from hybrid resin composite material Tetric N Ceram. A total of eighty (80) specimens were used in this study, where forty (40) specimens were used to evaluate the com...

AIM The aim of this study was to investigate the influence of three different thicknesses of In-Ceram core on the load at fracture of all-ceramic crowns. METHODS AND MATERIALS Thirty standardized crown-shaped nickel-chromium alloy dies were fabricated using a milling machine. Twenty dies were prepared with a 1 mm shoulder for Groups A and B. The only difference in the ten dies used for Group ...

OBJECTIVE The present study is the second part of an investigation of strength, fracture toughness and microstructure of nine all-ceramic materials. In the present study, DC Zirkon, an experimental yttria partially stabilized zirconia, In-Ceram Zirconia slip and In-Ceram Zirconia dry-pressed were compared. METHODS Strength was appraised on ten bar-shaped specimens for each material (20 x 4 x ...