Nanocomposite CrAlSiN compounds prepared by the cathodic arc evaporation technique were subjected to structural and mechanical characterization tests. X-ray diffraction, X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) were employed to investigate the effects of Si addition on the structure and phase development of the metastable NaCl structure of high aluminum CrA...

Quaternary cubic (Ti x Cr 1-x Al ~0.60) 1 N 1 coatings with 0<x<0.33 have been grown using reactive cathodic arc evaporation. When adding Ti the hardness was retained after annealing up to 1100 ºC which is a dramatic improvement compared to CrAlN coatings. The coatings showed an age hardening process caused by spinodal decomposition into coherent TiCr-and Al-rich cubic TiCrAlN domains and the f...

Anode activity in vacuum arc plays a very important role in both characteristics of vacuum arc and the interruption capacity of vacuum interrupters. In this paper, the transient thermal processes of anode in vacuum arc in a half of arc current cycle with frequency of 50 Hz are simulated by finite element analysis software, ANSYS. Some important phenomena of anode, e.g., the melt and solidificat...

In this investigation, Ti/TiN nanolayer and TiN single layer coatings were coated on substrate of AISI 316L stainless steel by applying physical vapor deposition (PVD) using the type of cathodic arc evaporation (CAE). The evaluation of microstructure were carried out using x-ray diffraction (XRD), nanoindentation, atomic force microscopy (AFM) as well as scanning electron microscopy (SEM). Pola...

Abstract Physical vapor deposition (PVD) refers to the removal of atoms from a solid or liquid by physical means, followed those on nearby surface form thin film coating. Various approaches and techniques are applied release including thermal evaporation, electron beam ion-driven sputtering, laser ablation, cathodic arc-based emission. Some based plasma discharge, while in other cases composing...

A series of TiAlON coatings were synthesized in a gaseous mixture of argon, nitrogen and oxygen by cathodic arc evaporation method using a Ti–Al mosaic target. Oxidation of coatings was carried out by heating the coated samples at the temperatures of 500, 600, 700, and 800°C for 1 h in air atmosphere. It was found that heat treatment changed the microstructure and composition of the coating. Th...

Chopping of current and induction of high voltage spikes has been observed at the rising edge of cathodic vacuum arcs. It is argued that current chopping at the rising edge is similar to the current chopping effect that is well-know for the arc current approaching current-zero. Current chopping can generate high voltage spikes, and thus cathodic arc equipment should be protected against voltage...

The addition of properly selected elements, coupled in nanoscale multilayer structures can further enhance the properties of TiAlN coatings and bring new high performance. The incorporation of Y in the nanoscale pseudo-superlattice TiAlCrN/TiAlYN with typical period of 1.7 nm not only improves the oxidation resistance but also effectively reduces the coefficient of friction of the coating from ...