The first of these articles deals with oxide-coated cathodes designed to be loaded with current densities several times higher than ordinary oxide-coated cathodes can withstand, and which yet have a life of a few thousand hours. Although these new cathodes cannot rival the L type of dispenser cathode as regards their permissible current density, they are cheaper and have a lower operating tempe...

Hierarchically structured MWCNT (h-MWCNT)-based cold cathodes were successfully achieved by means of a relatively simple and highly effective approach consisting of the appropriate combination of KOH-based pyramidal texturing of Si (100) substrates and PECVD growth of vertically aligned MWCNTs. By controlling the aspect ratio (AR) of the Si pyramids, we were able to tune the field electron emis...

Microbial electrolysis cells (MECs) are an efficient technology for generating hydrogen gas from organic matter, but alternatives to precious metals are needed for cathode catalysts. We show here that high surface area stainless steel brush cathodes produce hydrogen at rates and efficiencies similar to those achieved with platinum-catalyzed carbon cloth cathodes in single-chamber MECs. Using a ...

Implementation of microbial fuel cells (MFCs) for electricity production requires effective current generation from waste products via robust cathode reduction. Three cathode types using dissolved oxygen cathodes (DOCs), ferricyanide cathodes (FeCs) and air cathodes (AiCs) were therefore assessed using bioethanol effluent, containing 20.5 g/L xylose, 1.8 g/L arabinose and 2.5 g/L propionic acid...

Direct methanol fuel cells (DMFCs) hold great promise for applications ranging from portable power for electronics to transportation. However, apart from the high costs, current Pt-based cathodes in DMFCs suffer significantly from performance loss due to severe methanol crossover from anode to cathode. The migrated methanol in cathodes tends to contaminate Pt active sites through yielding a mix...

In this work, material-sensitive atomic force microscopy (AFM) techniques were used to analyse the cathodes of lithium-sulfur batteries. A comparison of their nanoscale electrical, electrochemical, and morphological properties was performed with samples prepared by either suspension-spraying or doctor-blade coating with different binders. Morphological studies of the cathodes before and after t...

Electric propulsion devices for space applications greatly reduce the propellant mass requirements on a spacecraft in comparison to chemical rockets. To date, gridded ion engines and Hall effect thrusters (HETs) rely on thermionic hollow cathodes to supply electrons for propellant ionization and ion beam neutralization. Hollow cathodes consume up to 10% of the total propellant used in low-power...

Although platinum is commonly used as catalyst on the cathode in microbial electrolysis cells (MEC), non-precious metal alternatives are needed to reduce costs. Cathodes were constructed using a nickel powder (0.5–1 mm) and their performance was compared to conventional electrodes containing Pt (0.002 mm) in MECs and electrochemical tests. The MEC performance in terms of coulombic efficiency, c...

The effect of proper enzyme orientation at the electrode surface was explored for two multi-copper oxygen reducing enzymes: Bilirubin Oxidase (BOx) and Laccase (Lac). Simultaneous utilization of "tethering" agent (1-pyrenebutanoic acid, succinimidyl ester; PBSE), for stable enzyme immobilization, and syringaldazine (Syr), for enzyme orientation, of both Lac and BOx led to a notable enhancement ...

Spray pyrolysis has been used to prepare La0.6 Sr0.4Co0.2Fe0.8O3-δ thin film cathodes for solid oxide fuel cell (SOFC) applications. The films are polycrystalline with nano-meter sized grains and less than 1 μm in thickness. Deposition parameters for film deposition have been established. The ratio of deposition temperature to solvent boiling point is found to be the most important processing p...