A model has been developed for calculating the rates of general corrosion of carbon steel and 13%Cr steel in aqueous systems containing carbon dioxide, hydrogen sulfide and other components. The model combines a comprehensive thermodynamic speciation module with electrochemical computations based on the mixed-potential theory. The electrochemical calculations recognize the effects of various pa...

Microbially-influenced corrosion (MIC) contributes to the general corrosion rate (CR), which is typically measured with carbon steel coupons. Here we explore the use of carbon steel ball bearings, referred to as beads (55.0 ± 0.3 mg; Ø = 0.238 cm), for determining CRs. CRs for samples from an oil field in Oceania incubated with beads were determined by the weight loss method, using acid treatme...

Corrosion of steel reinforcement is the major cause of deterioration in concrete structures, and carbon dioxide and especially chlorides are the main causes of damage. The rate at which chloride ions diffuse through concrete is a major determinant of the durability of structures. If chloride ions reach the vicinity of the rebar, the passive film around the steel can start to break down and the ...

In the Ultra-steel project at the National Institute for Materials Science (NIMS), which run from 1996 to 2005, high-Si-Al-content ultrafine-grained (UFG) weathering steel was developed by grain refinement and weathering guidance. It was found that this steel has excellent strength, toughness and corrosion resistance. Samples were prepared by multi pass warm rolling at temperatures between 773 ...

Microbially induced corrosion (MIC) is a complex problem that affects various industries. Several techniques have been developed to monitor corrosion and elucidate corrosion mechanisms, including microbiological processes that induce metal deterioration. We used zero resistance ammetry (ZRA) in a split chamber configuration to evaluate the effects of the facultatively anaerobic Fe(III) reducing...

Introduction In the 1970s, exterior bonded steel reinforcement was used sporadically to reinforce bridges to attain higher service load capacities. This steel post-strengthening system consisted of steel straps bonded with epoxies to the exterior of concrete beams. An alternative to the steel retrofit is woven carbon fiber reinforced polymer fabric applied in the same manner as steel. Carbon fi...

A new coumarin derivative, N,N'-((2E,2'E)-2,2'-(1,4-phenylenebis (methanylylidene))bis(hydrazinecarbonothioyl))bis(2-oxo-2H-chromene-3-carboxamide) PMBH, was synthesized and its chemical structure was elucidated and confirmed using spectroscopic techniques (Infrared spectroscopy IR, Proton nuclear magnetic resonance, 1H-NMR and carbon-13 nuclear magnetic resonance 13C-NMR). The corrosion inhibi...

One of the most frequently corrosion type is the atmospheric corrosion. Carbon steel behavior at atmospheric corrosion is presented on base of the literature data study. This has been reported to account for more failures in terms of cost and tonnage than any other type. About 80% from all degradations produced by corrosion in the metallic constructions are due to the atmospheric corrosion. The...

in this investigation, attempts were directed to study the inhibitive effects of nitrite and phosphate base inhibitors for the carbon steel alloy samples, which are used in an acid gas treatment process (the sulfiran® solution), in fe-edta solution. electrochemical techniques, i.e. polarization curves and electrochemical impedance spectroscopy (eis), were used to evaluate the inhibition efficie...

Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...