The modification of carbon powder with manganese dioxide using a wet impregnation procedure with electrochemical characterisation of the modified powder is described. The process involves saturation of the carbon powder with manganese(II) nitrate followed by thermal treatment at ca. 773 K leading to formation of manganese(IV) oxide on the surface of the carbon powder. The construction of compos...

Pitch-matrix composites for deicing, electromagnetic shielding and strain sensing have been developed by using carbon fiber (discontinuous) and carbon black as electrically conductive fillers. A composite with carbon fiber (5 vol%) as the sole filler is effective for strain sensing, which functions by the electrical resistivity increasing reversibly with tensile strain. A composite with carbon ...

An enzyme glucose microsensor using a glucose oxidase-immobilized porous carbon/Teflon composite microelectrode was developed. The microsensor was fabricated by etching a platinum microelectrode (platinum, radius of 25 and 50 micrometers) in hot aqua regia to create a cavity at the tip and then packing a porous carbon/Teflon composite, which was made from acetylene black and Teflon emulsion, in...

The aim of this study is to prepare and characterize two types of silver-functionalized carbon nanofiber (CNF) composite electrodes, i.e., silver-decorated CNF-epoxy and silver-modified natural zeolite-CNF-epoxy composite electrodes suitable for ibuprofen detection in aqueous solution. Ag carbon nanotube composite electrode exhibited the best electroanalytical parameters through applying precon...

 Increased usage of carbon fibre composite poses challenges for the automotive industry; one is to manage carbon fibre composites within the product development process. This paper combines knowledge in design engineering, material science and production technology, aiming to bridge these domains. The study indicates that mass production methods suitable for carbon fibre have several factors i...

Thermal explosion mode of combustion synthesis was used to fabricate TiAl-Al2O3 and TiAl-Ti2AlC-Al2O3 composites from elemental powder mixtures of TiO2, Al and C and characterized by XRD and Scanning Electron Microscopy (SEM) coupled with Energy-Dispersive Spectroscopy (EDS). The experimental results showed that thermite reaction of Al with TiO2 caused TiAl-Al2O3 composite formation. By adding ...

Li₃V₂(PO₄)3-xBrx/carbon (x = 0.08, 0.14, 0.20, and 0.26) composites as cathode materials for lithium-ion batteries were prepared through partially substituting PO₄3- with Br-, via a rheological phase reaction method. The crystal structure and morphology of the as-prepared composites were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and electrochemical propert...

Conventional carbon fiber reinforced phenolic resins are widely used to prepare carbon/carbon composites due to their high carbon yield. Property enhancement of carbon fabric/phenolic composites is possible through carbon nanomaterial dispersion in the matrix. The effect of carbon nanofiber dispersion in phenolic resins/carbon fabric composites was investigated. The dispersion efficiency in dif...

The synthesis and properties of an oxygen reduction catalyst based on a unique 3-dimensional (3D) nitrogen doped (N-doped) carbon composite are described. The composite material is synthesised via a two-step hydrothermal and pyrolysis method using bio-source low-cost materials of galactose and melamine. Firstly, the use of iron salts and galactose to hydrothermally produceiron oxide (Fe₂O₃) mag...

Vapor grown carbon fiber reinforced pure aluminum matrix composites were fabricated by the hot-pressing method below the melting temperature of pure aluminum. The surface structures of the vapor grown carbon fibers and the interfacial structures between the fibers and the matrix in the composite were observed. The precipitation mechanism of crystalline aluminum carbide was also investigated. An...