Cemented carbides, including coated cemented carbides, account for 75% of the cutting tools market because of their features such as high hardness, toughness, and the responsiveness to iron, through the use of tungsten carbide for their main hard phases and cobalt for their bonding metals. The consumption of tungsten continues to increase as the amount of carbide tool production increases with ...

The ethylene hydrogenation activity is compared for molybdenum oxycarbides, molybdenum carbides and a molybdenum alloy formed by reaction of molybdenum hexacarbonyl with alumina in ultrahigh vacuum using temperature-programmed desorption. It is found that molybdenum oxycarbides are inactive for ethylene hydrogenation. It is shown by forming carbides by reaction between alumina and ethylene that...

Small size molybdenum carbides (2.5 nm for MoC and 5.0 nm for Mo2C) with clean surface on graphene were prepared for efficient and stable hydrogen evolution reaction catalysts.

Design criteria for high strength tool materials have to include wear resistance of the abrasive particle, high hardness and adequate toughness. Cold compaction and vacuum sintering of PM high speed steels (HSSs) to full density is now a well established technique [1-3]. In recent years, work has been undertaken to sinter metal matrix composites that contain ceramic particles in HSSs by the sam...

in this research the effect of volume and morphology of eutectic carbides on tribological behaviour of ni-hard 4 cast irons have been investigated. therefore, as a result of the fact that the carbon content effects the carbides morphology of ni-hard cast irons, the chemical compositions of five different specimens were kept constant with the exception of the carbon content, which was varied fro...

in this study, ultrafine grained 2024 al alloy based b4c particles reinforced composite was produced by mechanical milling and hot extrusion. mechanical milling was used to synthesize the nanostructured al2024 in attrition mill under argon atmosphere up to 50h. a similar process was used to produce al2024-5%wt. b4c composite powder. to produce trimodal composites, milled powders were combined w...

The microstructure of the hypereutectic Fe-Cr-C alloy is observed by optical microscopy (OM). The initial growth morphology, the crystallographic structure, the semi-molten morphology and the stacking faults of the primary M7C3 carbide are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The in-suit growth process of the primary M7C3 carbide was observe...

Allegheny Ludlum Type 316Ti (UNS S31635) is a titanium stabilized version of Type 316 molybdenum-bearing austenitic stainless steel. It is also known as DIN/EN designation No. 1.4571. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-ru...

The effect of tempering temperature, within the range of 400 to 700°C, on the microstructure and hardness of two super-bainitic steels, one as the control parent sample and the other with added Co & Al was investigated. Post-tempering examinations of the super-bainitic samples showed that low temperature tempering cycles (400–500°C) resulted in carbides formation, and some increases in the hard...