Reliable estimation of the porous membranes neck-pore size distribution (NPSD) is the key element in the design and operation of all membrane separation processes. In this paper, a new approach is presented for reliable of NPSD of porous membranes using wet flow-state bubble point test data. For this purpose, a robust method based on the linear regularization theory is developed to extract NPSD...

Nucleate boiling heat transfer coefficients may be strongly reduced by scale formation, even for conditions where the bulk foulant concentration is well below the saturation concentration. Due to the mechanism of micro-layer evaporation, the local concentration at the heat transfer surface can be considerably increased, causing the formation of scale and changes in bubble frequency and bubble d...

The bubble effectiveness in liquid phase cylohexane non-catalytic oxidation process is discussed in this paper. Then the bubble effectiveness and a new proposed kinetic model are used in the mathematical model of the industrial reactor for the cyclohexane non-catalytic oxidation process. Furthermore, simulation and optimization based on this reactor model are carried out. The results of sim...

frothers havea profoundeffectonbubble size and also flotation efficiency. in present study the effect of type and dosage of frothers on the flotation response of coarse particles of quartz was investigated.  therefore, flotation response of coarse particles using frothers such as mibc, pine oil, poly propylene glycol with concentration of 0, 25, 50 and 75 g/t, was obtained respectively. for all...

the bubble effectiveness in liquid phase cylohexane non-catalytic oxidation process is discussed in this paper. then the bubble effectiveness and a new proposed kinetic model are used in the mathematical model of the industrial reactor for the cyclohexane non-catalytic oxidation process. furthermore, simulation and optimization based on this reactor model are carried out. the results of simulat...

The purpose of this study is to investigate and identify the periods of formation and bursting of speculative bubbles in Iran's capital market by creating a state space model and two-mode switching regime (mode 1 is bubble growth and burst stage and mode 2 is the time of bubble loss) during the period from April 2011 to March 2018. The Oxmetrics 7 software is used to investigate the existence o...

Measuring the volume of a bubble, especially at its detachment, is a basic subject in gas-liquid two-phase flow research. A new indirect method for this measurement under constant flow conditions is presented. An electronic device is designed and constructed based on laser beam intensity. This device calculates the frequency of the bubble formation by measuring the total time of the formation p...

Numerical simulation of bubble growth during pool boiling under the influence of low frequency vibration was performed to understand the influence of common vibrations such as those induced by wind, highway transportation, and nearby mechanical devices on the performance of thermal systems that rely on boiling. The simulations were done for saturated R123 boiling at 277.6 K with a 15 K wall sup...

Air bubbles are used in chemical, biochemical, environmental, and food process for improving the heat and mass transfer. Due to the dominance of non-Newtonian liquids used in various process industries, an understanding of bubble rise in rheologically complex liquids has grown to be important. An experimental study of the bubble rise velocity and drag co-efficient at high Reynolds number in non...